Kyocera - Основной каталог 2011-2012 ENG
для заказа - kyocera@kyocera-tools.ru
Cutting Design Advantages Cutting Design Advantages B
Name Name
Range Range
PS Medium-Roughing 0.25 15 General pur- Roughing
5 pose with wide
application Standard (Without Indication) 0.25 Low cutting Insert (Turning)
0.25 range. 5
5 More stable 14 force and suit-
15 due to large able for large
contact sur-
face. ap roughing.
Medium-Roughing 0.2 0.3 Low cutting Medium-Roughing (High Feed)
15 23 force for high
5 General
feed rate
purpose
cutting. Strong
HS chipbreaker. HT
Applicable to 0.3 edge and
0.2 copying. 23 applicable to
15
interrupted
5
cutting.
Medium-Roughing (High Feed) Medium-Roughing (High Feed) 0.28 For roughing of
steel.
21 Low cutting Roughing Suitable
force at high 0.4 for heavy
20
PT 0.36 feed cutting. PH interrupted
cutting and for
Land support workpieces
with scale
13 structure. due to strong
cutting edge.
0.1 Strong edge Single Sided Roughing (High Feed)
20 chipbreaker. Roughing and
12 Wide land high feed rate
5
GT design and PX operation.
0.1 smooth chip Low cutting
12 20 control even force
5 at high feed chipbreaker.
rate cutting.
Applicable Chipbreaker Range
(mm) (mm) (mm) (mm)
(Steel / Edge Length=12) (Steel / Edge Length=16) 12 (Steel / Edge Length=12,16,19) (Steel / Edge Length=12,16,19)
PH (19)
5 10 10 12
PH (16)
ap Standard ap 8 PS(HS) ap 8 ap PX (19)
6
4 GT 4 6 10
PS(HS) 4 PX (16)
3 PH (12)
8
2 Standard 2
6
1 GS PT 2 0.2 0.4 0.6 0.8 1.0
CQ f (mm/rev) 4
0.1 0.2 0.3 0.4 0.5 0.2 0.4 0.6 0.8 1.0 2 PX (12)
f (mm/rev) f (mm/rev)
0.2 0.4 0.6 0.8 1.0
f (mm/rev)
B5
для заказа - kyocera@kyocera-tools.ru www.kyocera-tools.ru