Kyocera - Основной каталог 2011-2012 ENG
для заказа - kyocera@kyocera-tools.ru Chamfering attachment
MagicDrill® DRC
Chamfering attachment
Drilling and chamfering simultaneously
By using the chamfering attachment, the SS-DRC type can drill and chamfer simultaneously.
Toolholder
L
Ds LS
Drilling V Length adjustment drilling depth.
T TsApplicable DrillDimensions (mm)
Std. Shank Dia.
DDescriptionDD2LLS Applicable Inserts
D2Ds2052 V
S20-CH10 29 122
S32-CH12 10 32 38 133 62 17 CT08T2-45A
S32-CH14 12 40 137 21
S32-CH16 14 42 141 16
S32-CH18 16 47 144
18 CT12T3-45A
19
15
K Note) Chamfering attachment is dedicated for Straight Shank SS-DRC type.
It cannot be used for Flanged Shank SF-DRC type.
Drilling and chamfering depths
90
Dc
Cutting Dia (mm) Cutting Depth (mm) Chamfering
T (5D Drill) dimension (mm)
Dc T (3D Drill) T (8D Drill) Applicable
Ts Toolholders
min max
min max 11 19 min max min max Ts 100 Ts max S20-CH10
7.94 8.49 12 21 21 37 47 63 S32-CH12
8.50 8.99 12 23 24 40 51 67 S32-CH14
9.00 9.49 13 25 S32-CH16
9.50 9.99 13 26 2.5 5.0 S32-CH18
10.00 10.49 14 28 27 43 56 72
10.50 10.99 14 30 31 47 61 77
11.00 11.49 15 32 28 49 60 81
11.50 11.99 15 30 31 52 64 85
12.00 12.49 17 32
12.50 12.99 19 34 3.5 7.0
13.00 13.49 21 36 34 55 69 90
13.50 13.99 19 37 37 58 73 94
14.00 14.49 21 39 41 56 79 94
14.50 14.99 25 43 44 59 83 96
15.00 15.99 30 44
16.00 16.99 35 49 4.0 8.0
17.00 17.99 47 62 88 103
51 66 93 108
50 68 94 112
53 71 98 116 4.0 8.0
59 77 107 125
66 80 117 131
4.0 8.0
73 87 127 141
Ts 100: Max chamfering dimension at the full feed.
Ts max: Max chamfering dimension at a 50% feed reduction.
Max chamfering dimension of machining possible without step feeding
: Std. Item : Check Availability
K10 для заказа - kyocera@kyocera-tools.ru www.kyocera-tools.ru