Kyocera - Основной каталог 2011-2012 ENG
для заказа - kyocera@kyocera-tools.ru Grooving / Plunge&Turn
GMM / GMGA / FGG Classification of usage P Carbon Steel / Alloy Steel Ref. Page for Toolholder
M Stainless Steel
Insert : Continuous-Light Interruption / 1st Choice K Cast Iron
: Continuous-Light Interruption / 2nd Choice N Non-ferrous Metals
R-hand shown : Continuous / 1st Choice S Titanium Alloy
: Continuous / 2nd Choice
Hard materials (under 40HRC)
H
Hard materials (over 40HRC)
(Previous Dimension (mm) TN90 Cermet CVD PVD KW10 Carbide
Description) W r M L H Coated Carbide Coated Carbide
Description CR9025 PR915 PR930
MM r H GMGA 6020-300R GMGA 6020-30R 6.0 3.0 4.3 20 4.3 G37
L W 0.02
Sharp-Cutting Oriented / Precision Class
Full-R / Copying
W 0.02 G37 G
L r GMGA 8030-400R GMGA 8030-40R 8.0 4.0 6.0 30 5.5 G39
Sharp-Cutting Oriented / Precision Class H G38
Full-R / Copying
W 0.05 r - 3.0 0.4 2.3 14 4.3 Grooving
Chip Control Oriented 22 - 3.0 1.5 2.3 14 4.3
M Class GMM 3014-04
M
Chip Control Oriented / M Class H L
Full-R / Copying
W 0.05 r
M
L GMM 3014-15R
HH
R
W 0.05
M
L GMM 3014-15RU - 3.0 1.5 2.3 14 4.3
Undercutting W 0.02 r 3.0 0.2 2.3 G38
Chip Control Oriented 22 - 4.0 0.4 3.3 20 4.3
FGG 3020-02
Face Grooving M L 4020-04 5.0 0.4 4.2
Chip Control Oriented H
5020-04
Precision Class
For recommended cutting conditions, see page G91~G93
Multi-Function Tool CERACUT Plunge & Turn Chipbreakers Edge Preparation
Series Shape Features Chamfer + R-honed Chamfer + R-honed
GMM-MW Corner-R(r) = 0.05 Sharp Corner
Excellent chip evacuation at
Grooving, Longitudinal turning, Cut- Edge
Off. Preparation
GMG-MG Low cutting force with ground MT Chipbreaker. CR9025 / PR915 PR930 / KW10
GMG-MS chipbreaker. Sharp Edge
GMM-MS Chamfer + R-honed
GMM-MT Grooving / Longitudinal turning / Cut- Corner-R(r) = 0.2-0.3
Off operations are minimum cutting Corner-R(r) = 0.2-0.3
GMM-TK force at Positive Edge.
Small corner-R(r) and minimize the Edge
GMM-NB core which remains in the center of
the face. Preparation
Large corner-R(r) and stable TK Chipbreaker CR9025 / PR915 PR930 / KW10
performance at cut off. R Honing Sharp Edge
Edge Sharp Corner
Flat rake face and non-chipbreaker. Preparation Corner-R(r) = 0.05
It works well for brass.
Without Chipbreaker (-NB) CR9025 PR930 / KW10
• Sharp Edge Spec. can reduce cutting resistance 40% less than that of chamfer edge.
: Std. Item : Check Availability R : Std. Item (R-hand Only) L : Std. Item (L-hand Only) Inserts are sold
для заказа - kyocera@kyocera-tools.ru www.kyocera-tools.ru in 10 piece boxes.
G33