Kyocera - Основной каталог 2010-2011 ENG
для заказа - kyocera@kyocera-tools.ru
Cutting Design Advantages Cutting Design Advantages B
Name Name
Range Range
PS Medium-Roughing 0.25 15 General pur- Roughing
5 pose with wide
application Conventional (No Indication) 0.25 Low cutting Insert (Turning)
0.25 range. 5
5 More stable 14 force and suit-
15 due to large able for large
contact sur-
face. ap roughing.
Medium-Roughing 0.2 0.3 Low cutting Medium-Roughing (High Feed)
15 23 force at high
5 General
feed rate
purpose
machining.
HS chipbreaker. HT
Applicable to 0.3 Strong edge
0.2 copying. 23 and applicable
15
to interrupted
5
cutting.
Medium-Roughing (High Feed) Medium-Roughing (High Feed) 0.28 For roughing of
steel.
21 Low cutting Roughing Suitable
force at high 0.4 for heavy
20
PT 0.36 feed machining. PH interrupted
cutting and for
Land support workpieces
with scale
13 structure. due to strong
cutting edge.
0.1 Strong edge Single Sided Roughing (High Feed) Roughing and 12 20 chipbreaker. high feed rate
5 Wide land
GT design and PX operation.
0.1 smooth chip Low cutting
12 20 control even at force
5 high feed rate chipbreaker.
machining.
Applicable Chipbreaker Range
(mm) (mm) (mm) (mm)
(Steel / Edge Length=12) (Steel / Edge Length=16) (Steel / Edge Length=12,16,19) (Steel / Edge Length=12,16,19)
5 10 12 12
PH (19)
ap Standard ap 8 PS(HS) ap ap PX (19)
6 10
4 GT 4 PH (16) 10
PS(HS) 8 PX (16)
3
6 8
2 Standard
4 6
1 GS PT 2 PH (12)
CQ 4
2
0.1 0.2 0.3 0.4 0.5 0.2 0.4 0.6 0.8 1.0 2 PX (12)
f (mm/rev) f (mm/rev) 0.2 0.4 0.6 0.8 1.0
f (mm/rev) 0.2 0.4 0.6 0.8 1.0
f (mm/rev)
kyocera@kyocera-tools.ru B5
www.kyocera-tools.ru