для заказа - kyocera@kyocera-tools.ru
FACE GROOVING TOOLHOLDERS (SWITCHBLADE TYPE)
KGDF Blade Toolholder
Toolholder Assembly Identification (Blade Description is printed.) (Toolholder Description is printed.)
Left-hand : KGDFL...-C Right-hand : KGDR...-C
Unit Description
(Unit Description is not printed.)
Left-hand : KGDFL...S
• Left-hand shown • Left-hand shown • Right-hand shown
Right-hand : KGDFR...S Right-hand : KGDFR...-C Left-hand : KGDL...-C
• Right-hand shown • Right-hand shown • Left-hand shown
• Right-hand Blade for Left-hand Toolholder, Left-hand Blade for Right-hand Toolholder.
• The Unit Description is not printed on the product. It is printed on the box label.
• Combination of the toolholder and blade (both separately sold) can make up the corresponding assembly.
• The insert clamping bolt (BH6x10TR), blade fixing bolt (SB-60120TR) and wrench (LTW-25) which are included in the toolholder can be used.
GROOVING Clamp Bolt Clamp Bolt Wrench
(for Insert Clamp) (for Blade)
G
EXTERNAL BH6X10TR SB-60120TR LTW-25
INTERNAL
FACE
F ace Grooving Toolholder Assembly Identification System
Hand of Tool Toolholder Shank Size Toolholder Length Width Symbol of Assembly Toolholder
2020 : U20 X : Special S : indicates the unit description
R : Right-hand 2525 : U25 2 : 2mm
L : Left-hand 3 : 3mm
:
KGDF R 2020 X 25 3 A S
Series Min. Diameter in Face Grooving Grooving Depth
KGDF Indicates the minimum external diameter * For the minimum external diameter A : 6~13mm 2-Edge Insert
Face Grooving suitable for the initial face grooving. which can be applied to the initial
face grooving (you can also use B : 13~15mm (1-Edge Insert can also be used.)
25 : 25mm 1-edge insert), see the MIN. value
: of "Face Grooving Dia. D" in the C : 20~25mm 1-Edge Insert
dimension tables of toolholders D : 32mm
and blades.
235 : 235mm
G84 kyocera@kyocera-tools.ru
www.kyocera-tools.ru