Kyocera - Основной каталог 2011-2012 ENG
для заказа - kyocera@kyocera-tools.ru
Turning Indexable Inserts (mm)
60°Triangle / Positive with Hole (mm) Description A T d
Description A T d TP_ 1102_ 6.35 2.38 3.5 11
TP_0802_ 4.76 2.38 2.3 11 TP_ 1103_ 6.35 3.18 3.3 11
B TP_0902_ 5.56 2.38 3.0 11 TP_ 1603_ 9.525 3.18 4.5 11
Positive 60° AT P Free-Cutting Steel
Insert r dM Classification of usage
K
C TN6010N Carbon steel / Alloy steel
D TN6020S : Interruption / 1st Choice
R H
S TN60 Stainless Steel
T PV7005 : Interruption / 2nd Choice
V PV7010
W PV7025 Gray Cast Iron
CA5505 : Light Interruption / 1st Choice
CA5515
CA5525 Nodular Cast Iron
CA5535 : Light Interruption / 2nd Choice
CA6515
CA6525 Non-ferrous Metals
CA4505 : Continuous / 1st Choice
CA4515
PR930 Heat-Resistant Alloys
PR1005 : Continuous / 2nd Choice
PR1025
PR1125 Titanium Alloy
PR1225 (In case hardness is under 45HRC)
PR1305
PR1310 Hard materials
PR1325
KW10Dim.CermetMEGACOATPVD CoatedMEGACOAT
SW05(mm)CermetCarbide
Ref. Page for
Toolholder
CVD Coated Carbide Carbide
Insert Description Applicable
Chipbreaker Range
Handed insert r
shows L-Hand (ap indicates radius)
Super Fine TPET 0802003 -FSF 0.03 E27
080201 -FSF 0.1 F45
Sharp Edge / Precision 080202 -FSF 0.2 F48
Insert (Turning) Super Fine TPET 1103003 -FSF 0.03 E27 (mm) (Steel / Edge Length=08)
110301 -FSF 0.1 F43 3
Finishing Sharp Edge / Precision 110302 -FSF 0.2 F45
F47 2 USF
TPET 0802005M -FSF < 0.05 ap 1
080201M -FSF < 0.1 E27
080202M -FSF < 0.2 F45 FSF
F48 0.1 0.2 0.3 0.4
TPET 1103005M -FSF < 0.05
110301M -FSF < 0.1 E27 f (mm/rev)
110302M -FSF < 0.2 F43
F45 (mm) (Steel / Edge Length=11)
TPET 0802003F -USF 0.03 F47 4
080201F -USF 0.1
080202F -USF 0.2 E27 3
F45 USF
TPET 1103003F -USF 0.03 F48
110301F -USF 0.1 2
110302F -USF 0.2 E27
F43 1
TPET 0802005MF -USF < 0.05 F45 ap FSF
080201MF -USF < 0.1 F47
080202MF -USF < 0.2 0.1 0.2 0.3 0.4
E27 f (mm rev)
TPET 1103005MF -USF < 0.05 F45
110301MF -USF < 0.1 F48
110302MF -USF < 0.2
E27
TPGB 080202 0.2 F43
080204 0.4 F45
080208 0.8 F47
TPGB 090202 0.2 E27
090204 0.4 F45
F48
F43
F45
F48
Cast Iron TPGB 1102005 0.05 F47
110201 0.1
110202 0.2
110204 0.4
TPGB 1103005 0.05 E27
110301 0.1 F43
110302 0.2 F45
110304 0.4 F47
110308 0.8
Without Chipbreaker TPGB 160304 0.4 F43
160308 0.8 F45
F47
Insert whose corner R(r) dimension expressed with less than sign (e.g.<0.05, <0.1, <0.2 etc.) indicate models with minus tolerance for corner R (r).
TN30 PV30 PV60 PV90 PV7020 Reference Page B69
CA4010 CA4115 CA4120 PR915 PR905
B68 Inserts are sold in 10 piece boxes.
: Std. Item R : Std. Item (R-hand Only) L : Std. Item (L-hand Only) : Check Availability
для заказа - kyocera@kyocera-tools.ru www.kyocera-tools.ru