Kyocera - Основной каталог 2011-2012 ENG
для заказа - kyocera@kyocera-tools.ru
[Cermet / Coated Carbide / Carbide]
(mm) (mm)
60°Triangle / Positive with Hole Description A T d Description A T d
TP_0802_ 4.76 2.38 2.3 11 TP_1103_ 6.35 3.18 3.3 11
TPMT0902_ 5.56 2.38 2.8 11 TPMT1603_ 9.525 3.18 4.4 11
TP_0902 5.56 2.38 3.0 11 TP_1603_ 9.525 3.18 4.5 11 B
TP_1102 6.35 2.38 3.5 11 TP_1604_ 9.525 4.76 4.4 11 Positive
Insert
60° AT P Free-Cutting Steel
r dM Classification of usage C
K D
TN6010N Carbon steel / Alloy steel R
TN6020S : Interruption / 1st Choice S
H T
TN60 Stainless Steel V
PV7005 : Interruption / 2nd Choice W
PV7010
PV7025 Gray Cast Iron
CA5505 : Light Interruption / 1st Choice
CA5515
CA5525 Nodular Cast Iron
CA5535 : Light Interruption / 2nd Choice
CA6515
CA6525 Non-ferrous Metals
CA4505 : Continuous / 1st Choice
CA4515
PR930 Heat-Resistant Alloys
PR1005 : Continuous / 2nd Choice
PR1025
PR1125 Titanium Alloy
PR1225 (In case hardness is under 45HRC)
PR1305
PR1310 Hard materials
PR1325
KW10Dim.CermetMEGACOATPVD CoatedMEGACOAT
SW05(mm)CermetCarbide
Ref. Page for
Toolholder
CVD Coated Carbide Carbide
Insert Description Applicable
Chipbreaker Range
Handed insert r
shows L-Hand (ap indicates radius)
TPGH 080201 0.1 L E27
080202 0.2 L L F45
080204 0.4 L F48
Finishing TPGH 090201 0.1 L F43 (mm) (Steel / Edge Length=08,09) Insert (Turning)
ap ap0902020.2 LLF452
090204 0.4 L F48 1
L
TPGH 110202 0.2 L L F47 0.1 0.2 0.3 0.4
110204 0.4 L f (mm/rev)
LL E27
TPGH 110302 0.2 L F43
110304 0.4 L F45
110308 0.8 L F47
TPGH 160302 0.2 L F43
160304 0.4 L F45
160308 0.8 F47
TPGH 080201M < 0.1 E27
080202M < 0.2 F45
080204M < 0.4 F48
TPGH 090201M < 0.1 F43 (mm) (Steel / Edge Length=11,16)
090202M < 0.2 F45 3
090204M < 0.4 F48 2 (11)
TPGH 110202M < 0.2 F47 1 16
110204M < 0.4
TPGH 110302M < 0.2 E27 0.1 0.2 0.3 0.4
110304M < 0.4 F43
110308M < 0.8
F45 f (mm/rev)
F47
TPGH 160302M < 0.2 F43
160304M < 0.4 F45
160308M < 0.8 F47
TPGH 110302 -H 0.2 L E27
110304 -H 0.4 L F43
110308 -H 0.8 L F45
F47
TPGH 160304 -H 0.4 L L F43 (mm) (Steel / Edge Length=11,16)
160308 -H 0.8 F45 3
F47 H Edge Length=16
TPGT 160402 -H 0.2 2
160404 -H 0.4 -
160408 -H 0.8 1
Medium E27 H(Edge Length=11)
ap F43
F45 0.1 0.2 0.3 0.4
TPGH 110302M -H < 0.2 F47 f (mm/rev)
110304M -H < 0.4 F43
110308M -H < 0.8 F45
F47
TPGH 160304M -H < 0.4
160308M -H < 0.8
Insert whose corner R(r) dimension expressed with less than sign (e.g.<0.05, <0.1, <0.2 etc.) indicate models with minus tolerance for corner R (r).
TN30 PV30 PV60 PV90 PV7020 Reference Page B69
CA4010 CA4115 CA4120 PR915 PR905
Inserts are sold in 10 piece boxes.
B67
: Std. Item R : Std. Item (R-hand Only) L : Std. Item (L-hand Only) : Check Availability
для заказа - kyocera@kyocera-tools.ru www.kyocera-tools.ru