Kyocera - Основной каталог 2011-2012 ENG

Ball-nose end mill                              для заказа - kyocera@kyocera-tools.ru                            L24~L27
                                                                                                                 L24~L25
U YSeries, Series                            Ball-nose end mill with 2 / 3 / 4 flutes.
   UEB YEB                                                                                                       L26
                                             High efficiency radius. Enables large cutting volume and high
                   (3UEBS)                   efficiency cutting with special corner-radius shape.
                                             Ramping and arc cutting are possible.
PSeries
     PDR

                   (6PDRS)

Hardened metals                                                                                                  L28~L29
                                                                                                                 L28
H Series           MEGACOAT Hard is applied  New PVD coating MEGACOAT Hard for hardened metals is
                                             applied.
                   (HFS)                     Large core diameter and negative rake angle improves edge
                                             strength.

                                             Helix angle 45 degrees. High efficiency cutting and long tool life
                                             with wide range of 4, 5, 6, 7 and 8 flute types.

U Series                                     For hardened metals with negative rake angle. Helix angle is 50     L29      L
     UGS                                     degrees.

                   (UGS)

Aluminum & Non-ferrous metals                                                                                    L30~L32  Solid End Mill
                                                                                                                 L30~L31
N Series           (3NESM)                   NES type realizes good surface finish with wiper cutting edge.
    NES NFS                                  Varied interval flute design prevents chattering and improves
                                             cutting efficiency and surface finish quality of side wall of
                                             workpiece.
                                             MFS type improves chip evacuation owing to special rake face
                                             design and 45 degree helix angle.

                   (3NFSM)

A Series                                     Roughing endmill for high efficiency cutting of aluminum and        L32
                                             non-ferrous metals.

                   (3AESM)

                               для заказа - kyocera@kyocera-tools.ru www.kyocera-tools.ru                                 L7