Kyocera - Основной каталог 2011-2012 ENG
для заказа - kyocera@kyocera-tools.ru
Application of Parallel Pipe / Tapered Pipe Thread
Parallel Pipe: G(PF), Rp(PS) Tapered Pipe: R, Rc(PT) (BSPT)
Nominal Thread TPI Internal (G,Rp) Bore Same Root’s Nominal Thread TPI Internal (G,Rp) Bore Same Root’s
Symbol (TPI) Insert Radius Symbol (TPI) Insert Radius
Dia. Dia.
(Previous Symbol) (Previous Symbol)
G HPTR 06005-55-010 6.56 R ,Rc HPTR 06005-55-010 -
(-) 28 0.12 (-) 28 0.12
G 08007-55-010 8.57 R , Rc 08007-55-010 -
(PF ) (PT )
G 11.45 R , Rc -
(PF ) (PT ) 0.18
19 HPTR 08007-55-010 0.18 19 HPTR 08007-55-010
G R , Rc -
(PF ) 14.95 (PT )
When using “HPT type” for Parallel Pipe / Tapered Pipe threading, thread’s corners become sharp edged due to its partial prole, and the shape will not be the same as the standard shape for
Parallel Pipe / Tapered Pipe.
Depth of Cut & Number of Passes (Parallel Pipe/G(PF), Tapered Pipe/BSPT (PT) (Rc))
TPI Total ap No. of 1 Pass 2 Pass 3 Pass 4 Pass 5 Pass 6 Pass 7 Pass 8 Pass 9 Pass 10 Pass11 Pass12 Pass13 Pass14 Pass15 Pass16 Pass 17 Pass 18 Pass
(mm) Passes
28 0.61 12 0.07 0.07 0.06 0.06 0.06 0.05 0.05 0.05 0.04 0.04 0.03 0.03
19 0.95 18 0.07 0.07 0.07 0.07 0.06 0.06 0.06 0.06 0.06 0.05 0.05 0.05 0.04 0.04 0.04 0.04 0.03 0.03
Application of ANSI Tapered Pipe Thread (NPT)
Nominal Thread TPI Toolholder Internal Thread
Insert
Full Prole J
Partial Prole
NPT 27 No Tools Available
NPT
NPT 18 PSH Sleeve HPTR06005-60-005 -
NPT (See J26) HPTR07507-60-005
NPT 14 PSH Sleeve HPTR07507-60-005 - Threading
NPT (See J26)
NPT
NPT 14 SINR2016S-16 cannot pass through the processing diameter.
SINR2016S-16 - 16IR14NPT
• Application of NPTF Thread
NPTF is the thread for sealing pipes without using any sealing material.
Thread symbol is similar to NPT but the Tolerance is different from that of NPT and the above Inserts are not available for NPTF.
Depth of Cut & Number of Passes American National Tapered Pipe
TPI Total ap No. of 1 Pass 2 Pass 3 Pass 4 Pass 5 Pass 6 Pass 7 Pass 8 Pass 9 Pass 10 Pass 11 Pass 12 Pass 13 Pass 14 Pass 15 Pass 16 Pass 17 Pass 18 Pass 19 Pass
(mm) Passes
18 1.23 16 0.18 0.14 0.12 0.12 0.10 0.09 0.08 0.08 0.07 0.06 0.05 0.04 0.03 0.03 0.02 0.02
14 1.56 19 0.18 0.16 0.14 0.14 0.12 0.10 0.09 0.09 0.08 0.07 0.07 0.06 0.05 0.05 0.04 0.04 0.03 0.03 0.02
: Std. Item : Check Availability
для заказа - kyocera@kyocera-tools.ru www.kyocera-tools.ru J25
