Kyocera - Основной каталог 2011-2012 ENG
для заказа - kyocera@kyocera-tools.ru
Grooving / Cut-Off
KGD Integral Type
F1 T
W
H1 B
L2 H2 H3
h
A L3
L1
R-hand Shown
Toolholder Dimensions
Width (mm) Std. Dimension mm Spare Parts
Available Grooving Width W
Depth (mm) mm Clamp Bolt Wrench
Description
R L H1=h H2 H3 B L1 L2 L3 F1 A T MIN MAX
H
KGD 1616H-2T06 16 4.0 16 100 27.7 28.0 15.2 HH5X16
HH5X25
6 2020K-2T06 20 20 125 19.2 6
- 28.0 -
2525M-2T06 25 25 150 24.2
Cut-off KGD 1616H-2T10 16 4.0 16 100 30.2 30.5 15.2 HH5X16
10 2020K-2T10 20
2 2525M-2T10 20 125 30.5 - 19.2 10
- 1.7 2.0 3.0 LW-4
25 25 150 24.2 HH5X25
KGD 1616H-2T17 16 4.0 16 100 31.2 31.5 15.2
2012K-2T17 12 125 11.2 HH5X16
17 20 17
2020K-2T17 - 20 125 32.5 - 19.2
2525M-2T17 25 25 150 24.2 HH5X25
KGD 1616H-3T06 16 4.0 16 100 27.7 28.0 14.8 HH5X16
6 2020K-3T06 20 HH5X25
2525M-3T06 20 125 28.0 - 18.8 6
-
25 25 150 23.8
KGD 1616H-3T10 16 4.0 16 100 30.2 30.5 14.8 HH5X16
10 2020K-3T10 20
3 2525M-3T10 20 125 18.8 10
1616H-3T20 - 30.5 - 2.4 3.0 4.0 LW-4
KGD 2012K-3T20 25 25 150 23.8 HH5X25
2020K-3T20
20 16 4.0 9.5 16 100 34.2 34.5 14.8
12 125 10.8 HH5X16
20 34.5 20
- 20 125 - 18.8
2525M-3T20 25 25 150 35.5 23.8 HH5X25
KGD 2020K-4T10 20 20 125 18.3 10 HH5X16
10 2525M-4T10 25 30.5 23.3 HH5X25
25 150
4 KGD 2020K-4T20 20 - 20 125 34.5 - 18.3 3.4 20 4.0 5.0 HH5X16 LW-4
20 2525M-4T20 25
25 KGD 2525M-4T25 25 25 150 35.5 23.3 HH5X25
25 150 40.5 23.3 25
KGD 2020K-5T10 20 20 125 17.8 10 HH5X16
10 2525M-5T10 25 30.5 22.8
25 150
5 KGD 2020K-5T17 20 - 20 125 - 17.8 4.4 5.0 6.0 LW-4
17 2525M-5T17 25 37.5 17 HH5X25
25 150 22.8
25 KGD 2525M-5T25 25 25 150 40.5 22.8 25
15 KGD 2525M-6T15 25 25 150 32.5 22.4 15
6 2525M-6T30 - - 5.3 6.0 6.0 HH5X25 LW-4
25 150 45.5 22.4 30
30 KGD 25
KGD 2525M-8T25 25 7.0 25 150 44.2 22.0
8 25 3232P-8T25 32 - 43.3 6.0 25 8.0 8.0 HH6X25 LW-5
32 170 - 29.0
Note)1. Dimension T : Maximum depth to which processing can be made. (If the dimension T is 20 mm or more, the maximum Recommended Cutting Conditions H13
groove-depth made by the 2-edged insert will be 18 mm.)
2. Recommended tightening torque of clamp bolt: 6.5N•m (Groove width 2 - 6 mm), 8.0N•m (Groove width 8 mm) Std. Item
H14 Check Availability
для заказа - kyocera@kyocera-tools.ru www.kyocera-tools.ru