Kyocera - Основной каталог 2011-2012 ENG
для заказа - kyocera@kyocera-tools.ru [Solid]
System Tip-Bar for Micro Internal Grooving
VNG
L2 1
22 A
F
L4W
T
HL1
W 0.03 (Edge enlarged)
Right-hand shown
Classification of usage P Carbon Steel / Alloy Steel
M Stainless Steel
: Continuous / 1st Choice K Cast Iron TC60 Cermet
: Continuous / 2nd Choice N Non-ferrous Metals PR630
PR915
S Titanium Alloy PR930
KW10 Carbide
Insert Dimensions H Hard materials (under 40HRC) KPD001
Description Hard materials (over 40HRC) KPD010
Min. Dimension (mm) Ref. Page for ToolholderPVDPCD G
Cutting GroovingCoated
Carbide
Dia.
A W r D H L1 L2 L3 L4 F T
VNGR 0410-11 1.0
0420-11 4 3.5 0.8
0510-11 2.0
0520-11 30.8 11 0.1
0610-20 1.0
0620-20 5 4.4 1.0
0710-20 2.0
0720-20 0.05 - 3.9 -
1.0
6 5.2 1.8
2.0
39.8 20 0.3
1.0
7 6.2 2.0 F16
2.0 F17
F18
VNGR 0410-11NB 1.0
0420-11NB 4 3.5 0.8
0510-11NB 2.0
0520-11NB 30.8 11 0.1
0610-20NB 1.0
0620-20NB 5 4.4 1.0
0710-20NB 2.0
0720-20NB 0.05 - 3.9 -
1.0
6 5.2 1.8
2.0
39.8 20 0.3
7 1.0
2.0 6.2 2.0
• Dimension T shows available grooving depth.
• Dimension L4 indicates the cutting edge is above the Tool’s Center Position.
Recommended Cutting Conditions
Recommended Insert Grade (Cutting Speed: m/min)
Cermet PVD Coated Carbide Carbide VNG04 VNG06
VNG05 VNG07 Remarks
Workpiece Material TC60
PR630
PR930 f (mm/rev)
KW10
Carbon Steel / Alloy Steel 60 120 30 100 30 100 0.03 0.05
Stainless Steel 50 100 30 80 30 80 Coolant
0.02 0.03
Non-ferrous Metals 300 0.05 0.08
: 1st Recommendation : 2nd Recommendation
: Std. Item : Check Availability System Tip-Bars (VNG) are G43CBN & PCD Inserts are sold
in 1 piece boxes.
R : Std. Item (R-hand Only) L : Std. Item (L-hand Only) sold in 5 piece boxes.
для заказа - kyocera@kyocera-tools.ru www.kyocera-tools.ru