Kyocera - Основной каталог 2011-2012 ENG
для заказа - kyocera@kyocera-tools.ru Screw Clamp
External Shallow Grooving Toolholders [for TGF Insert] Usage difference
between KTGF-F and
KTGF-F (Without Offset) KTGF toolholders
It is necessary to use
(2.5) * Clamp Screw can also be operated from this side. “Without Offset Type” in
operating the automatic lathe.
2 h F1 H3 B
Dimension F1
2 L2 L1
H1
Right-hand shown R-hand insert for R-hand toolholder, L-hand insert for L-hand toolholder.H2
H2
KTGF (With Offset) No gap Dimension B
2 Without Offset Type (KTGF-F)
G (2.5) Dimension F1
h F1 2 L1 H1 H3 B
L2
Grooving Right-hand shown Large Dimension B
gap
R-hand insert for R-hand toolholder, L-hand insert for L-hand toolholder.
With Offset Type (KTGF)
Toolholder Dimensions
Description Std. Dimension (mm) Spare Parts Remarks
R L H1=h H2 H3 B L1 L2 F1
Clamp Screw Wrench
KTGF 1010JX-16F 10 2 10 10
1212JX-16F 12 - 2.5 12 120 18.5 12 SB-4070TRW FT-8
1616JX-16F 16 16 16
Insert Grades
KTGF 1212F-16F 12 - 2.5 12 85 18.5 12 SB-4070TRW FT-8 20° TN90, TC60
PR1115, PR930, KW10
KTGF 1010F-16 10 4 10 80 12
11° KPD010, KPD001
1212H-16
12 2 12 100 18.5 16 6° TC40
1616H-16 16 2.5 16 100 20 SB-4070TRS FT-10
2020K-16 20 - 20 125 20 25
2525M-16 25 25 150 32
S-KTGF (Sleeve Holder)
12
2
H2 Insert Grades
L1
20 20° TN90, TC60
2 H1 PR1115, PR930, KW10
d2 Note 1 11° KPD010, KPD001
2.5
F2 F1 6° TC40
d1
Left-hand shown D
Toolholder Dimensions 5 R-hand Insert for L-hand Toolholder.
Note 1. Dimension B shows available grooving depth.
Dimension (mm)
Description Std. F1 F2 d1 Spare Parts
D
S12F-KTGFL16 12.0 11.0 Clamp Screw Wrench
S14H-KTGFL16 14.0 13.0
S15F-KTGFL16 L1 9.0 d2 H1=H2
S16F-KTGFL16 15.875 80 14.6 27 11
S19G-KTGFL16 16.0 100 6 13
S19K-KTGFL16 10.5 17.6
S20G-KTGFL16 19.05 85 15
S20K-KTGFL16
S25.0H-KTGFL16 20.0 90 SB-4070TRS FT-10
S25K-KTGFL16 120 17
25.0 90
25.4 120 11.0 18.6 18
100
120 10 14.0 23.6 32 23
: Std. Item : Check Availability
G16 для заказа - kyocera@kyocera-tools.ru www.kyocera-tools.ru