Kyocera - Основной каталог 2010-2011 ENG
для заказа - kyocera@kyocera-to[oClse.rurmet / Coated Carbide / Carbide]
(mm)
60°Triangle • Positive with Hole Description A (mm) Description A T d
T d TPGN0902_ 5.56 2.38 - 11
TP_0802_ 4.76 2.38 2.3 11 TP_ N1103_ 6.35 3.18 - 11
TP_1103_ 6.35 3.18 3.3 11 TP_ N1603_ 9.525 3.18 - 11
60 P Free-cutting steel B
Classication of usage
M Positive
Carbon Steel and Alloy Steel : Interruption / 1st Choice Insert
Stainless Steel
: Interruption / 2nd Choice $
Gray Cast Iron %
K : Light Interruption / 1st Choice 3
Nodular Cast Iron 4
:Light Interruption / 2nd Choice 5
A N 7
d Non-ferrous Metals :Continuous / 1st Choice 8
Heat-resistant alloy : Continuous / 2nd Choice
r TN6010TS Titanium Alloy
TN6020Description
Insert H Hard Materials (In case hardness is under 45HRC)
TN60
Handed Insert PV7005Dim.CermetPVD PVD
shows Left-hand PV7010(mm)Cermet Coated Carbide
PV7020
Super Fine CA5505
CA5515
CA5525
CA5535
CA6515
CA6525
CA4010
CA4115
CA4120
CA4505
CA4515
PR930
PR1005
PR1025
PR1125
KW10 Carbide
Ref. Page for
Toolholder
CVD Coated Carbide
r Applicable
Chipbreaker Range
TPET 0802003 -FSF 0.03 E22
080201 -FSF 0.1 F55
080202 -FSF 0.2 F58
TPET 1103003 -FSF 0.03 E22 (mm) (Steel / Edge Length=08) Insert (Turning)
110301 -FSF 0.1 F33 3
110302 -FSF 0.2 F55
F57 2 USF
TPET 0802005M -FSF < 0.05 ap 1
080201M -FSF < 0.1 E22
080202M -FSF < 0.2 F55 FSF
F58
Finishing Sharp Edge / Precision TPET 1103005M -FSF < 0.05 0.1 0.2 0.3 0.4
Super Fine TPET 110301M -FSF < 0.1 E22 f (mm/rev)
TPET 110302M -FSF < 0.2 F33
F55 (mm) (Steel / Edge Length=11)
0802003F -USF 0.03 F57 ap 4
080201F -USF 0.1
080202F -USF 0.2 E22 3
F55 USF
1103003F -USF 0.03 F58
110301F -USF 0.1 2
110302F -USF 0.2 E22
F33 1
TPET 0802005MF -USF < 0.05 F55 FSF
080201MF -USF < 0.1 F57
080202MF -USF < 0.2 0.1 0.2 0.3 0.4
E22 f (mm/rev)
TPET 1103005MF -USF < 0.05 F55
Sharp Edge / Precision 110301MF -USF < 0.1 F58
110302MF -USF < 0.2
E22
TPGB 080202 0.2 F33
080204 0.4 F55
080208 0.8 F57
TPGB 090202 0.2 E22
090204 0.4 F55
F58
0.05
0.1 F33
0.2 F55
0.4 F58
TPGB 1102005
110201
Cast Iron 110202 F57
110204
TPGB 1103005 0.05 E22
110301 0.1 F33
110302 0.2 F55
110304 0.4 F57
110308 0.8
Without Chipbreaker TPGB 160304 0.4 F33
160308 0.8 F55
F57
Insert whose corner R(r) dimension expressed with less than sign (e.g. <0.05, <0.1, <0.2 etc.) indicate models with minus tolerance for corner R(r).
For grades TN30 PV60 PR905 , See Page B76
PV30 PV90 PR915
B63Inserts are sold in 10 piee boxes.
: Std. Item : Check Availability R : Std. Item (R-hand Only) kyLo:cSetrda.@Itekmyo(Lc-ehraan-dtoOonlsly.)ru
www.kyocera-tools.ru