Kyocera - Основной каталог 2010-2011 ENG

                                                       для заказа - kyocera@kyocera-tools.ru

 Cutting Performance of Radius Mill (Long Shank type)                                          Slotting

Workpiece
  Material

                     D(Cutting Dia.)                                                          Cutting Conditions
                                                                                               Tooholder: Standard
  $                                                                                          Vc=120 150m/min (See below table)
	4$
                                                                                         ap = varied fz= varied Dry
                                                                                               Overhang Length = L (See below table)
                ap
Description
                                                 ap

                                                                           ap
                                                                                                                                        ap
                .314                      .314                                                                  .314
                ONJO
	7DNNJO
              ONJO
	7DNNJO
                                                          ONJO
	7DNNJO

                -NN                                -NN                                                                            -NN

                            ap (mm)                                 ap (mm)                                                                            ap (mm)
                                                                                                                                             

   08 type                                                                                                                            
(RDMT08T2M0-H)                                                                                                                        
                                                                                                                                      

                                                                                                                                      

                                                                                                                     
                                     Feed Rate (mm/t                         Feed Rate (mm/t                                                           Feed Rate (mm/t

                .3145                   .3145
                ONJO
	7DNNJO
              ONJO
	7DNNJO

                -NN                                -NN

                            ap (mm)                                 ap (mm)
                                                               

   10 type                                                     
(RPMT10T3M0)    
                                                               

                                                                

                                                                
                ap ap
                                                                           ap ap
                                                                                                                                      ap                              M
                                                                                                                                                                                                  apFeed Rate (mm/tFeed Rate (mm/t

                                                                                                                                                                          Milling.314.314
                ONJO
	7DNNJO
              ONJO
	7DNNJO
                                                          .3145          .314
                -NN                               -NN                                                                           ONJO
	7DNNJO
     ONJO
	7DNNJO

                                                                                                                                          -NN                      -NN
                            ap (mm)                                 ap (mm)
                                                                                                                                                     ap (mm)                   ap (mm)
                                                                                                                                                                             
   12 type                                                     
(RPMT1204M0-H)                                                                                                                                                              
                                                               
                                                                                                                                                                             
                                                               
                                                                                                                                                                             
                                                                
                                                                                                                                                                             

                                                                                                                               
                                      Feed Rate (mm/t                         Feed Rate (mm/t                         Feed Rate (mm/t                                           Feed Rate (mm/t

                .314                      .314                       .314
                ONJO
	7DNNJO
              ONJO
	7DNNJO
                ONJO
	7DNNJO

                -NN                               -NN                                -NN

                            ap (mm)                                 ap (mm)                                 ap (mm)
                                                                                                      

   16 type                                                                                            
(RPMT1606M0-H)  
                                                                                                      

                                                                                                       

                                                                                                       
                ap
                                                                           ap
                                                                                                                                      ap

                

                                                                                                                     
                             Feed Rate (mm/t                        Feed Rate (mm/t                                                                    Feed Rate (mm/t

                                                           kyocera@kyocera-tools.ru                                                                                                              M127
                                                               www.kyocera-tools.ru