Kyocera - Основной каталог 2010-2011 ENG
для заказа - kyocera@kyocera-tools.ru
MECX
Cutting Performance of MECX Endmill
[Vc=150m/min Workpiece Material: C50 (S50C)]
Cutting Overhang Description Shouldering Slotting
Dia. Length A MECX08-S10-07-1T (Cutting width ae = D/2) Ramping and Helical Milling
MECX10-S10-07-1T
Description (mm) MECX12-S12-07-2T
MECX16-S16-07-3T
MECX20-S20-07-4T (mm) (mm)
MECX25-S25-07-5T
8 MECX08-S10-07-1T 16 - MECX32-S32-07-6T ap ap ap ap ap ap ap60.05 0.1 0.15 6 0.05 0.1 0.15
10 MECX10-S10-07-1T 17 - ap ap ap ap ap ap ap5fz (mm/t)0.155 fz (mm/t) 0.15
12 MECX12-S12-07-2T 18 30 4 0.15 4 0.15
16 MECX16-S16-07-3T 20 40 3 0.15 3 0.15
20 MECX20-S20-07-4T 20 40 2 0.15 2 0.15
25 MECX25-S25-07-5T 25 50 1 0.15 1 0.15
32 MECX32-S32-07-6T 30 50 0 0.15 0 0.15
Shape
(mm) (mm)
6 0.05 0.1 6 0.05 0.1
5 fz (mm/t) 5 fz (mm/t)
4 4
3 3
2 2
1 1
0 0
(mm) (mm)
6 0.05 0.1 6 0.05 0.1
5 fz (mm/t) 5 fz (mm/t)
4 4
3 3
2 2
1 1
0 0
(mm) (mm)
Milling 6 0.05 0.1 6 0.05 0.1
A 5 fz (mm/t) 5 fz (mm/t)
4 4
3 3
2 2
1 1
0 0
(mm) (mm)
*Machining with extended overhang length is 6 0.05 0.1 6 0.05 0.1
not recommended for 8 and 10. 5 fz (mm/t) 5 fz (mm/t)
4 4
*The cutting performance list shows applicable 3 3
range of JT Chipbreaker (PR830) with Stan- 2 2
dard ute-number type. 1 1
0 0
For Multi-Edge type, use with 70% or less of
ap. (mm) (mm)
M *Cutting conditions of JS Chipbreaker 6 0.05 0.1 6 0.05 0.1
5 fz (mm/t) 5 fz (mm/t)
For MECX08~MECX12 4 4
3 3
Decrease the feed rate by 25% according to 2 2
cutting capability list. 1 1
0 0
For MECX16 and over
Decrease the feed rate and ap by 30% accord- (mm) (mm)
ing to cutting capability list.
6 6
5 5
4 4
3 3
2 2
1 1
0 0.05 0.1 0 0.05 0.1
fz (mm/t) fz (mm/t)
Cutting Performance of MECX Milling Cutter
[Vc=150m/min Workpiece Material: C50 (S50C)]
Cutting Description Overhang Description Shouldering
Dia. Length A
MECX032R-07-8T-M (Cutting width ae = D/2)
(mm) MECX040R-07-10T-M
(mm) *Use JT Chipbreaker.
*Not Recommended for Slotting.
32 MECX032R-07-8T-M 6
40 MECX040R-07-10T-M 100 ap ap 5
50 MECX050R-07-12T-M 4
63 MECX063R-07-14T-M 3 0.05 0.1 0.15
Shape 2 fz (mm/t)
1
0
(mm)
MECX050R-07-12T-M 6
MECX063R-07-14T-M 5
4
A 3
2
1
0 0.05 0.1 0.15
fz (mm/t)
M54 kyocera@kyocera-tools.ru
www.kyocera-tools.ru