Kyocera - Основной каталог 2010-2011 ENG
MEC для заказа - kyocera@kyocera-tools.ru Shouldering Slotting Facing
MEC Face Mill d d
bb
Rake Angle (°)
11Type
A.R.(MAX): +23°
Std. S R.R. : -7°
E H
E 17Type
No. of Insert a a
A.R.(MAX): +19°
S
H R.R. : -7°
d2 d1 0°
D
d1 0° Fig.2
D Fig.1
Dimensions Dimension (mm) Coolant Hole Spare Parts Max.
Description D d d1 d2 H E a b S Drawing
Weight Clamp screw Wrench Revolution
(kg) (min1)
MEC 040R-11-5T-M 5 40 16 14 8.5 20 5.5 8.5 0.2 30,000
Standard 050R-11-5T-M 5 50 22 18 12 40 22 6.3 10.4 0.3 22,500
063R-11-6T-M 20,500
080R-11-7T-M 6 63 Yes Fig.1 0.7 18,500
100R-11-9T-MN 17,000
7 80 27 20 14 50 26 7 12.4 10 1.0 SB-2555TRG DTM-8
9 100 32 26 17.6 55 8 14.4 1.6
METRIC 125R-11-11T-M 11 125 45 32 3.1 15,000
160R-11-14T-M 40 63 33 9.5 16.4 No Fig.2 4.5 13,900
14 160 68 -
MEC 040R-17-4T-M 4 40 16 14 8.5 20 5.5 8.5 0.3 25,000
Standard 050R-17-4T-M 4 50 22 18 12 40 22 6.3 10.4 0.4 17,000
063R-17-5T-M 14,500
080R-17-6T-M 5 63 Yes Fig.1 0.6 12,000
100R-17-7T-MN 10,500
6 80 27 20 14 50 26 7 12.4 15.7 1.0 SB-4070TRN DTM-15
7 100 32 26 17.6 55 8 14.4 1.8
125R-17-9T-M 9 125 45 32 3.1 8,900
160R-17-12T-M 40 63 33 9.5 16.4 No Fig.2 4.5 7,400
12 160 68 -
Coarse pitch MEC 063R-11-6T 6 63 6 9.5 0.8 20,500
080R-11-7T 25.4 20 14 50 26 18,500
100R-11-9TN Fig.1 1.0 17,000
7 80
9 100 31.75 26 17.6 32 8 12.7 10 Yes 1.8 SB-2555TRG DTM-8
125R-11-11T 11 125 38.1 45 32 63 38 10 15.9 3.4 15,000
13,900
M 160R-11-14TBore Dia. Inch spec 14 160 50.8 70 - 47 10 19.1 Fig.2 4.4
Close MEC 063R-11-8T 8 63 0.8 20,500
pitch 080R-11-10T 25.4 20 14 50 26 6 9.5 10 Yes SB-2555TRG DTM-8 18,500
10 80 1.0
Coarse pitch MEC 063R-17-5T 5 63 0.8 14,500
080R-17-6T 25.4 20 14 50 26 6 9.5 Fig.1 12,000
6 80 1.0
Milling 100R-17-7TN 7 100 31.75 26 17.6 32 8 12.7 15.7 Yes 1.8 SB-4070TRN DTM-15 10,500
125R-17-9T 9 125 38.1 45 32 63 38 10 15.9 3.4 8,900
160R-17-12T 12 160 50.8 70 - 47 10 19.1 Fig.2 4.5 7,400
Close MEC 063R-17-6T 6 63 25.4 20 14 50 26 6 9.5 0.8 14,500
pitch 080R-17-8T 12,000
8 80 15.7 Yes Fig.1 1.0 SB-4070TRN DTM-15
100R-17-9TN 9 100 31.75 26 17.6 63 32 8 12.7 1.8 10,500
Max. Revolution
When running the endmill and cutter at the maximum revolution, the insert or holder may be damaged by centrifugal force. For more details, see “Warning” on page M47.
When using Center-through Air / Coolant / Mist Table1
If Center Through air (Coolant, Mist) is used, please use appropriate arbor and clamp Toolholder Arbor clamp bolt (Attachment) Wrench
with arbor bolt. (Table1) MEC040R -M HH825H LW-5
(Double width 5mm)
MEC’s surface nish when shouldering with multiple passes MEC050R -M HH1030H LW-6
MEC063R -M (Double width 6mm)
In order to obtain smoothly nished shoulder wall by multiple passes of MEC Milling Cut- MEC063R HH1235H LW-8
ter, please keep ap less than 5.5mm for 11T3 type and also keep ap less than 9mm for MEC080R HH1652H (Double width 8mm)
1704 type. HF2053H
MEC100R -(M) N LW-12
(Double width 12mm)
MEC125R -(M)
MEC160R -M LW-14
(Double width 14mm)
MEC160R HF2460H LW-17
(Double width 17mm)
Wrench is not included. Please purchase separately.
When using inserts with corner radii R1.6 or larger, additional modications of the cutter body will be necessary. See the chart below for the recommended
modications.
Insert Corner-R(r) Material to be removed from * R shape is recommended for additional processing to Additionally Insert with
cutter body corner the body corner. processed large corner-R(r)
1.6 When applying chamfer shaped additional processing,
2.0 R1.0 do not cut away too much.
2.4
R1.2 Body corner
3.1 R1.6 Pre-processing Post-processing
4.0 R2.5 : Std. Item : Check Availability R : Std. Item (R-hand Only) L : Std. Item (L-hand Only)
M46 kyocera@kyocera-tools.ru
www.kyocera-tools.ru