Kyocera - Основной каталог 2010-2011 ENG
для заказа - kyocera@kyocera-tools.ru Straight Shank SS-DRC
SS-DRC (Cutting Depth: 8D) Coolant Hole
L3 (Cutting Depth)
Dc
Ds h6
Lp Ls %
L1
• For Lp indicates distance from drill point to corner edge, see K4~K6
Toolholder Dimensions
Dimension (mm) Spare Parts Applicable cham-
Ls Wrench fering Holder and
Description Std. Applicable Applicable Inserts Insert description
Insert Dia. Dc Ds K9 K4~K6
SS10- DRC080M-8 Holder Insert
DRC085M-8 (h6) L1 L3
DRC090M-8 min. max.
DRC095M-8
7.94 8.49 122.5 68 DC0794M-SC~DC0840M-SC
SS12- DRC100M-8 8.50 8.99 127.0 72
DRC105M-8 9.00 9.49 10 40 WDRC8 DC0850M-SC~DC0890M-SC
DRC110M-8 9.50 9.99 131.5 76 (WDRC17) S20-CH10 CT08T2-45A
DRC115M-8 10.00 10.49 137.0 80
146.5 84 DC0900M-SC~DC0940M-SC
SS14- DRC120M-8
DRC125M-8 DC0950M-SC~DC0990M-SC
DRC130M-8
DRC135M-8 DC1000M-SC~DC1040M-SC
SS16- DRC140M-8 10.50 10.99 151.0 88 WDRC10 DC1050M-SC~DC1090M-SC
DRC145M-8 11.00 11.49 12 (WDRC17) S32-CH12
DRC150M-8 11.50 11.99
155.5 92 DC1100M-SC~DC1140M-SC
SS18- DRC160M-8 160.0 96
DRC170M-8 DC1150M-SC~DC1190M-SC K
12.00 12.49 164.5 100 45
SS20- DRC180M-8 12.50 12.99 169.0 104
DRC190M-8 13.00 13.49 14 DC1200M-SC~DC1240M-SC
13.50 13.99 173.5 108
SS25- DRC200M-8 179.0 112 WDRC12 DC1250M-SC~DC1290M-SC S32-CH14
(WDRC17)
DC1300M-SC~DC1340M-SC CT12T3-45A
DC1350M-SC~DC1390M-SC
14.00 AA14.49 186.5 116 DC1400M-SC~DC1440M-SC
14.50 14.99 16 191.0 120
15.00 Drilling15.9948WDRC14 DC1450M-SC~DC1490M-SC S32-CH16
200.0 128 (WDRC17) DC1500M-SC~DC1580M-SC
16.00 16.99 209.0 136 DC1600M-SC~DC1690M-SC
17.00 17.99 18 S32-CH18
18.00 18.99
19.00 19.99 219.0 144 49 DC1700M-SC~DC1790M-SC
20.00 20.99 230.0 152
20 DC1800M-SC~DC1890M-SC - -
239.0 160 51 WDRC17
25 254.0 168
DC1900M-SC~DC1990M-SC
57 DC2000M-SC~DC2099M-SC - -
Wrench Description Dimension (mm) Remarks
Shape WDRC8 ABC Description is
WDRC10 printed in this area.
C WDRC12 10.2
WDRC14
B 12.2
43 33
14.2
17.2
WDRC17 77 52 • WDRC17(Multiple type wrench) has four
insert entry points. If using an insert ranging
from DC1700M-SC to DC2099-SC, use the
entry point printe as “17.00~20.99”.
• WDRC17 can be used instead of WDRC8~14
wrench.
B
: Std. Item : Check Availability R : Std. Item (R-hand Only) L : Std. Item (L-hand Only)
kyocera@kyocera-tools.ru K9
www.kyocera-tools.ru