Kyocera - Основной каталог 2010-2011 ENG
для заказа - kyocera@kyocera-tools.ru CERACUT / Plunge & Turn
KGM Width: 3.0~8.0mm
F1 T H3 B
W5° L2
h H2 H1
Right-hand shown A L1
Toolholder Dimensions
Std. Dimension (mm) Width Spare Parts
W (mm)
Screw Wrench
MIN. MAX.
Description
R L H1=h H2 H3 B L1 L2 F1 A T
KGM 1212H-3 12 4 6 12 100 10.8 3.0 3.0 SB-5TR - LTW-20 -
1616H-3 16 7 16 125 LW-4
2020K-3 20 27 14.8 2.4 9 3.0 4.0 - HH5X16 - LW-4
2525M-3 20 7 18.8 LW-4
25 -
25 150 23.8 HH5X25
2020K-4 20 - 7 20 125 27 18.3 3.4 10 4.0 5.0 - HH5X16 - H
2525M-4 25 25 150 23.3
HH5X25
2020K-5 20 20 125 17.8 HH5X16
2525M-5 25 - 7 25 150 27 22.8 4.4 10 5.0 6.0 - HH5X25 -
3232P-5 32 32 170 29.8
2525M-8 25 7.5 10.5 25 150 40 22.0F16.0 25 8.0 8.0 - HH6X25 - LW-5
3232P-8 32 - 32 170 29.0 hW
H2
• Dimension T shows the distance from the Toolholder to the cutting edge. H1 H3 B
• 4.0mm width Insert can be installed in KGM 1212H-3, but is not recommended due to the toolholder's rigidity. Cut-off
KGM-T Width: 2.0~6.0mm
T
L2
5
A L1
Right-hand shown Width
W (mm)
Toolholder Dimensions MIN. MAX.
Std. Dimension (mm) Spare Parts
Screw Wrench
Description
R L H1=h H2 H3 B L1 L2 F1 A T
KGM 2012K-2T17 20 12 125 11.15 SB-5TR - LTW-20 -
2020K-2T17 - HH5X16 - LW-4
Std. Stock 2525M-2T17 20 - 7 20 125 33 19.15 1.7 17 2.0 3.0 - HH5X25 - LW-4
1616H-3T20 3.0 4.0 HH5X16
2012K-3T20 25 25 150 24.15 4.0 5.0 SB-5TR LTW-20 -
2020K-3T20 - - - LW-4
2525M-3T20 16 4 16 100 14.8 HH5X16
2020K-4T20 - HH5X25 - LW-4
2525M-4T20 20 - 7 12 125 36 10.8 2.4 20 HH5X16
2525M-4T25 20 18.8 LW-4
2525M-5T25 HH5X25 LW-4
3232P-5T25 25 25 150 23.8
2525M-6T30
20 20 125 36 18.3 20
25 - 7.5 25 150 36 23.3 3.4 20
41 25
25 - 8.5 25 150 42 22.8 4.4 25 5.0 6.0 - HH5X25 -
32 32 170 29.8 6.0 6.0 - HH5X25 -
25 - 9.5 25 150 45 22.4 5.2 30
• Dimension T shows the distance from the Toolholder to the cutting edge. See the Table (H14) for the relationship between the Grooving Depth and the Cutting Dia..
• When using GMG / GMM type (2-edge) Insert, set the grooving depth under 15mm.
: Std. Item : Check Availability R : Std. Item (R-hand Only) L : Std. Item (L-hand Ony)
kyocera@kyocera-tools.ru H13
www.kyocera-tools.ru