Kyocera - Основной каталог 2010-2011 ENG
для заказа - kyocera@kyocera-tools.ru Back Clamp / Screw Clamp
Toolholders for Back Turning [ABS15 Insert]
AABS-40F (Edge Width: 2.8mm, MAX Depth: 4mm)
4.2 *Lock Screw is operated from this direction.
h F1 30° L1 H1 B
H2
L2
Right-hand shown
E SABS-40F (Edge Width: 2.8mm, MAX Depth: 4mm)
4.2
Small Tools h F1 30° L2 H1 B
Standard Corner-R(r)
Toolholder Dimensions Right-hand shown Spare Parts
Description Anchor Pin Lock Screw Clamp Screw Wrench
Dimension (mm)
Std.
H1=h H2 B L1 L2 F1
AABSR 0810K -40F 8 2 10 125 18.5 10.2 LPA-11
SABSR 1010K -40F 0.15
1212M -40F 10 - 10 125 - 10.2 HSB4X8R - FH-2
1616M -40F LPA-13 - SB-3080TR FT-10
0810K -40F 12 - 12 150 - 12.2 LPA-17
1010K -40F
1212F -40F 16 - 16 150 - 16.2 0.15 -
1212M -40F
1616M -40F 8 10 125 10.2
2020K -40F
10 10 125 10.2
12 12 85 12.2
--
12 12 150 12.2
16 16 150 16.2
20 20 125 20.2
Applicable Inserts
Insert Description Corner-R Reference (mm) Application Range
(r: mm) Page 6 (Steel)
5
7.0 ABS15R4005 0.05 4 ABS15
2.8 15R4015 0.15 3
2
15° 0.4 B72 1
ABS15R4005M 0.05
15R4015M 0.15
15.4
4.2
4.2
ap
30°
r 3.97 0.1 0.2
f (mm/rev)
Recommended Cutting Conditions
Workpiece Material Grooving Traversing
80~100
Carbon Steel Vc (m/min)
0.02 0.02~0.07
Alloy Steel f (mm/rev) 30~50
Stainless Steel Vc (m/min) 0.02 0.02~0.05
f (mm/rev) 150~200
Non-ferrous Vc (m/min) 0.02 0.02~0.10
Metals f (mm/rev)
: Std. Item : Check Availability R : Std. Item (R-hand Only) L : Std. Item (L-hand Only)
E8 kyocera@kyocera-tools.ru
www.kyocera-tools.ru