для заказа - kyocera@kyocera-tools.ru
CUT-OFF TOOLHOLDERS (SUB SPINDLE TOOLING)
K TKFS (Small Diameter Cut-Off for Sub Spindle)
Sub Spindle Dia. L4 F1 1°
40mm(-12A,-16A)
50mm(-12B,-16B) H1 B T 2°
H1 B
30° L3
L1
Dmax
Right-hand Shown 1° F1
2° h
Sub Spindle Dia. Right-hand Insert for Right-hand Toolholder
40mm(-12A,-16A) T
50mm(-12B,-16B)
30° L3 KTKFS§6-12JX
L1 KTKFS§6-16JX
KTKFS§1010K-12A
Dmax KTKFS§1010K-16A
h only for left shape
0.079” L2
Left-hand Shown Left-hand Insert for Left-hand Toolholder
T oolholder Dimensions
Part Number Stock Unit Cut-Off Dimensions Spare Parts Applicable
RL Dia. L1 L2 L3 L4 F1 Clamp Screw Wrench Inserts
H1=h B H11
Dmax T
KTKFS§ 6-12JX 0.236~0.472 0.375 0.375 4.750 0.590 0.866 1.024 0.197 0.236 SB-4050TRN LTW-10S TKFS12§
0.500 4.750 - 1.024 1.024 0.197 0.236 SB-4050TRN LTW-10S TKFS16§
H 8-12JXCUT-OFF inch 0.236~0.472 0.500 0.375 4.750 0.866 1.181 0.197 0.315
0.500 4.750 0.787 1.024 1.181 0.197 0.315
KTKFS§ 6-16JX 0.551~0.630 0.375 -
8-16JX 0.551~0.630 0.500
KTKFS§ 1010K-12A 6~12 10 10 120 15 22 26 5 6
1212F-12A 6~12 12 12 85 - 22 26 5 6 SB-4050TRN LTW-10S TKFS12§
1212K-12B 6~12 12 12 120 - 26 26 5 6
KTKFS§ 1010K-16A mm 14~16 5 8
10 10 120 20 22 30
1212F-16A 14~16 12 12 85 - 22 30 5 8 SB-4050TRN LTW-10S TKFS16§
1212K-16B 14~16 12 12 120 - 26 30 5 8
• Dimension T shows the distance from the toolholder to the cutting edge. Recommended Cutting Conditions H11
Only Right-hand is available for L4 dimension
T KFS (Dmax) Main Spindle Main Spindle
Sub Spindle
Dimensions (in)
HT Sub Spindle
Insert W±0.03Part Number W D
inch mm Max
Right-handed Insert Shown 0.039”rTKFS12§ 100-S0.236
Dsmax150-S0.039 0.039
d 0.039”
Dsmax
0.059 0.059 0.354
r
200-S 0.079 0.079 0.472
Dsmax TKFS16§ 150-S 0.059 0.059 0.551
200-S 0.079 0.079 0.630
Fig.1 Fig.2
As Fig.2 shows, the cutting diameter of the insert is measured when the lead edge passes 0.039" past the center line of part.
• As Fig.1 shows, use KTKFL (Left-hand) when the distance between main spindle and sub spindle are long.
• As Fig.2 shows, KTKFS is recommended when the workpiece diameters are small and the distance between the main spindle and sub spindle are short
H10 kyocera@kyocera-tools.ru U.S. Stock Standard :
www.kyocera-tools.ru World Express (Shipping: 7-10 Business Days) :