Kyocera - Каталог Токарный инструмент 2016 ENG
для заказа - kyocera@kyocera-tools.ru
INSERT GRADES
CBNGRADES CBN
A KYOCERA CBN is second only to diamond in hardness. CBN (Cubic Boron Nitride) is a
synthetically produced material with high thermal conductivity which provides stable cutting.
FEATURES
• S uperior wear resistance when cutting hardened materials
• S uitable for high speed cutting of cast iron and sintered steel
• H igh thermal conductivity provides stable cutting
FEATURES OF CBN
Material Description Color Av. Grain Hardness of Transverse Advantages
Size (m) Substrate Strength
H (GPa) (MPa) · Excellent wear resistance and crack resistance, non-coated CBN
· Application: Finishing and continuous cutting of hardened die steel
Hardened KBN510 Black 2 28 1,000 · Good balance of toughness and wear resistance, non-coated CBN
Materials · Application: General grade for hardened steel, high stability at high speed and high feed cutting
KBN525 Black 1 and 25 1,250 · Heat-resistant MEGACOAT on highly heat-resistant CBN substrate
Sintered Under 27 1,000 · Application: High speed finishing of hardened steel
Steel KBN05M Blackish 28 1,000 · Heat-resistant MEGACOAT on CBN with hard binder phase, superior anti-crater wear resistance
Red 0.5-1.5 25 1,250 · Application: High speed finishing of hardened die steel
K (MEGACOAT) 30 1,350 · Heat-resistant MEGACOAT on micro-grain CBN with heat resistant binder phase
Blackish 2 · Application: Stable cutting of hardened steel at high speed
Cast Iron KBN10M Red · Heat-resistant MEGACOAT on tougher CBN
1 and · Application: Stable cutting of hardened steel for continuous to interrupted cutting
(MEGACOAT) Blackish Under · Excellent wear resistance due to CBN with heat-resistant binder phase, non-coated CBN
Red · Application: Stable cutting of sintered steel (ferrous sintered alloy) at low speed
KBN25M 1-4 · High CBN content ratio
Blackish · Application: Machining of sintered steel (preventing burr formation)
(MEGACOAT) Red · Heat-resistant MEGACOAT on CBN with heat-resistant binder phase
· Application: Stable cutting of sintered steel (ferrous sintered alloy) at low speed
KBN30M · Heat-resistant MEGACOAT on CBN rich substrate
· Application: General cutting of sintered steel (ferrous sintered alloy) at high speed
(MEGACOAT) · Excellent wear resistance due to high CBN content and special binder
· Application: High speed machining of gray cast iron
KBN65B Black 2 32 1,150 · Heat-resistant MEGACOAT on CBN rich substrate with hard binder phase
· Application: High speed finishing of gray cast iron
KBN570 Black 2-4 34 1,350 · TiN coated solid CBN
2 32 1,150 · Application: Heavy duty, interrupted cutting and finishing of hardened steel, hardened roll steel and cast iron
KBN65M Blackish 2-4 34 1,350
Red 2 39 1,400
(MEGACOAT) 0.5-6 33 1,250
Blackish 9 31 1,050
KBN70M Red
(MEGACOAT)
KBN475 Black
KBN60M Blackish
Red
(MEGACOAT)
Gold
KBN900
(TiN COAT)
MEGACOAT CBN Advantages of MEGACOAT MEGACOAT
Properties of PVD Coated Layer
• Long tool life and stable cutting due to superior heat-resistance and hardness
• Improvement of crater wear (oxidation, diffusional wear) resistance
• High thermal stability and surface smoothness provde excellent surface finish
Application Map Sintered Steel Cast Iron
KBN70M KBN475
Hardened Materials
Low Cutting Speed HighKBN05M KBN30M
Low Cutting Speed HighKBN25M
Low Cutting Speed High KBN900
KBN10M KBN570 KBN60M
KBN65B
KBN35M
Continuous Light Int. Interruption Heavy Int. Continuous Light Int. Interruption Continuous Light Int. Interruption
Finishing Medium Roughing kyFioncisehirnag@kMyoedcieumra-toRoolsu.grhuing Finishing Medium Roughing
www.kyocera-tools.ru
A16