Kyocera - Каталог Токарный инструмент 2016 ENG

                                                                                           для заказа - kyocera@kyocera-tools.ru

   TURNING SUMMARY

   Goose-Neck Toolholder

   for Swiss Tool Automatic Lathe (Gang Edge Tool Post)

    S wiss Tool Automatic Lathe (Guide Bush System)

         The Goose-neck Holder works with automatic lathes that do not
         move toolholders in longitudinal direction (Z-axis)

    W hen Using a Conventional Toolholder

                       Guide Bush

E  SMALL TOOLS                                                                             Bar Material (Workpiece)  Tool position is fixed and workpiece

                                                                       (X-axis Direction)                            moves longitudinally

   (Z-axis Direction)                   Toolholder Motion
                       Short Distance (Close to Guide Bush)
   Movement of
     Workpiece

    P roblems When Using a Conventional Toolholder                                                                    Toolholder Installation Problems
                                                                                                                        When Using a Conventional Toolholder
   Problems When Machining with a
   Conventional Toolholder                                                                                                      1)	 Additional space is required 		
                                                                                                                                	 for an adapter.
                                                     Case 1
                                                                                                                                2)	 Toolholder's handling is difficult 	
                                                                    At multiple passes, when the                                	 due to limited space.
                                                                    bar material returns into
                                                                    guide bush, the burr contacts and                           3)	 It is necessary to buy an adapter.
                                                                    breaks the guide bush.
                                                                                                                                4)	 An adapter may interfere with 		
                                                     Case 2                                                                     	 the next toolpost

                                                                    The workpiece burr contacts guide bush                        Adapter                  Tool post
                                                                    and causes dimensional variation.

                                                     Case 3

                                                                    Chips may come into guide bush
                                                                    when bar material returns into
                                                                    guide bush after roughing.

                                                     Case 4

                                                                    Bar material gets out of control of
                                                                    guide bush and unable to continue cutting.

                                                                                              kyocera@kyocera-tools.ru

   E4 www.kyocera-tools.ru