для заказа - kyocera@kyocera-tools.ru Diameter Adjustment
S HEM for Magic Drill DRS
Sleeve Dimensions Adjustable
Sleeves
Description Stock Dimension L3 L4 Dia. Adjustment
d D1 D2 L1 L2 Range (mm)
SHEM 2025-43 +0.1, –0.1
2032-43 20 25 41 43 4 36 3.0 +0.1, –0.1
20 32 49 43 6 36 2.5
• Dia. Adjustment Range adjusts the cutting diameter. Drilling
How to Use
• SHEM is designed for only the Small Diameter Magic Drill.
• SHEM is for cutting diameter adjustment only. (up to +0.1mm or -0.1mm)
• SHEM is not for center height adjustment like conventional adjustable sleeve (SHE-type).
• Apply SHEM when adjusting the cutting diameter for pre-drilling before threading.
Set the outer edge horizontally: 90° to the marking line on the sleeve (Fig.1)
To adjust to a larger diameter, align the +0.1 mark on the sleeve with the flat on the drill shank. To adjust to a smaller diameter, align the -0.1
mark on the sleeve with the flat on the drill shank.
Tighten the bottom screw firmly which is directly touching the drill. Slightly tighten the upper screw which is directly touching the sleeve.
Caution: Not for use with Collet Chuck type Arbor
kyocera@kyocera-tools.ru 78
www.kyocera-tools.ru
