Kyocera - Каталог фрезерование 2017 ENG
для заказа - kyocera@kyocera-tools.ru
MEY MULTI-FUNCTION END MILL
Drilling Depth [Standard / Long Head / Long Shank: 1049]
MEY16-S16 / MEY17-S16 MEY20-S20 / MEY21-S20 MEY1000-S100-HG GRADES
MEY25-S25 / MEY26-S25
A
Drilling Depth H (in) 0.984 0.002 0.004 0.006 0.008 Drilling Depth H (in) 0.984 0.002 0.004 0.006 0.008 Drilling Depth H (in) 0.984 0.002 0.004 0.006 0.008 LINEUP / INSERTS 45 / 70 LEAD B
0.787 0.787 0.787 C
0.591 fz (ipt) 0.591 fz (ipt) 0.591 fz (ipt) D
0.394 0.394 0.394 E
0.197 0.008 0.197 0.008 0.197 0.008 F
G
0 fz (ipt) 0 fz (ipt) 0 fz (ipt) H
J
MEY1250-S125-HG MEY1500-S125-HG MEY2000-S150-HG K
MEY32-S32 / MEY33-S32 MEY40-S32 MEY50-S42 O
P
Drilling Depth H (in) 1.969 0.002 0.004 0.006 Drilling Depth H (in) 1.969 0.002 0.004 0.006 Drilling Depth H (in) 1.969 0.002 0.004 0.006 75 LEAD R
1.575 1.575 1.575 T
1.181 1.181 1.181
0.787 0.787 0.787
0.394 0.394 0.394
0 0 0
How to Use MEY Effectively
Ramping / Helical Milling Helical Milling Factors 90 LEAD
• Ramping angle is recommended to be under 8°. D (Cutting Dia.) HIGH FEED
• Plunge depth per revolution of helical milling should be set
under 1/2 of the tool diameter.
Use compressed air during machining.
Under 8° h (Cutting Depth) DS (Tool Center's Movement Dia.) MULTI-FUNCTION SLOT MILLS RADIUS / BALL-NOSE OTHER APPLICATIONS TOOL HOLDING SPARE PARTS
DL(Machining Dia.)
DS
How to find “DS”
DS=DL-D
How to find “h”
h=DStan
( should be under 8°)
Shouldering
• Tools with 0.039" larger cutting diameter than shank diameter are available.
• High wall shouldering is possible
• Lineup
d
Part Number Unit D d (Shank Dia.) No interference
inch 1.500" 1.250"
MEY1500-S125-HG 1.984" 1.500"
MEY2000-S1500-HG mm
MEY17-S16 17 16
MEY21-S20 21 20 TECHNICAL
MEY26-S25 26 25
MEY33-S32 33 32
MEY17-S16-190 17 16
MEY21-S20-200 21 20
MEY26-S25-220 26 25
MEY33-S32-230 33 32
D
(d+0.394”: Cutting Dia.)
INDEX
kyocera@kyocera-tools.ru G5
www.kyocera-tools.ru