Kyocera - Каталог фрезерование 2017 ENG
ITEMNSE!W для заказа - kyocera@kyocera-tools.ru
MFH-RAPTOR
MFH Face Mill (Inch Size)
D2 D2 D2
d d d
b b b
E d2 d1
a d1 D1
D1 D
SD Fig.3
HFig.1
E
a
S
H
E
a
S
H
3/8 24UNF
(Left-hand Thread)
d2
d1
D1
D
Fig.2
Toolholder Dimensions with SOMT10 Inserts (Inch Size)
Stock Rake Angle
No. of (°)
Inserts
Coolant Hole
Drawing
Weight
(kg)
Max
RPM
Dimensions (in)
Part Number D1
D GM LD FL D2 d d1 d2 H E a b S *SL A.R. R.R.
MFH 2000R-10-4T 4 2.000 1.331 1.510 1.469 1.750 0.750 0.669 0.433 1.969 0.947 0.187 0.313 +10° -5° 0.4 10,000
2000R-10-5T 5 2.000 1.331 1.510 1.469 1.750 0.750 0.669 0.433 1.969 0.947 0.187 0.313 +10° -5° 0.4 10,000
2500R-10-5T 5 2.500 1.831 2.010 1.969 2.250 0.750 0.669 0.433 1.969 0.750 0.187 0.313 0.059 0.138 +10° -4° Yes Fig.1 0.7 8,800
2500R-10-6T 6 2.500 1.831 2.010 1.969 2.250 0.750 0.669 0.433 1.969 0.750 0.187 0.313 +10° -4° 0.7 8,800
HIGH FEED 3000R-10-7T 7 3.000 2.331 2.510 2.469 2.750 1.000 0.866 0.551 2.480 1.063 0.236 0.382 +10° -4° 1.3 7,600
F Toolholder Dimensions with SOMT14 Inserts (Inch Size)
Stock Rake Angle
No. of (°)
Inserts
Coolant Hole
Drawing
Weight
(kg)
Max
RPM
Dimensions (in)
Part Number D1
GM LD
D FL D2 d d1 d2 H E a b S *SL A.R. R.R.
NEW MFH 2000R-14-4T 4 2.000 1.094 1.330 1.291 1.750 0.750 0.500 3/8 1.969 0.827 0.187 0.313 +10° -10° Yes Fig.2 0.4 8,800
24UNF
2500R-14-4T 4 2.500 1.594 1.830 1.791 2.250 0.750 0.669 0.433 1.969 0.750 0.187 0.313 +10° -10° 0.6 7,400
2500R-14-5T 5 2.500 1.594 1.830 1.791 2.250 0.750 0.669 0.433 1.969 0.750 0.187 0.313 +10° -10° 0.6 7,400
3000R-14-5T 5 3.000 2.094 2.330 2.291 2.750 1.000 0.866 0.551 2.480 1.063 0.236 0.382 +10° -9° Yes Fig.1 1.2 6,400
3000R-14-6T 6 3.000 2.094 2.330 2.291 2.750 1.000 0.866 0.551 2.480 1.063 0.236 0.382 0.079 0.197 +10° -9° 1.2 6,400
4000R-14-6T 6 4.000 3.094 3.330 3.291 3.750 1.500 1.299 0.866 2.480 1.181 0.394 0.626 +10° -7° 2.3 5,600
4000R-14-7T 7 4.000 3.094 3.330 3.291 3.750 1.500 1.299 0.866 2.480 1.181 0.394 0.626 +10° -7° 2.3 5,600
5000R-14-7T 7 5.000 4.094 4.330 4.291 3.750 1.500 2.047 - 2.480 1.496 0.394 0.626 +10° -7° Yes 2.9 4,800
6000R-14-8T 8 6.000 5.094 5.330 5.291 4.880 2.000 2.835 - 2.480 1.496 0.433 0.752 +10° -6° Fig.3
No 4.5 4,200
Spare Parts and Applicable Inserts (Inch Size) * Refer to LD dimensions in figure below
Clamp Wrench Spare Parts Mounting LD Chipbreaker
Screw Pre-Set Anti-seize Mounting Screw Cutting Edge Dimensions
Torque Wrench*1 Compound Bolt Applicable
Inserts
Part Number DTPM TTP NEW 75° 45°
B17, F10
(116°4)°
S
SL
D1
MFH 2000R-10-4T HH3/8-1.25(H) D
HH3/8-1.25(H)
2000R-10-5T DTPM-15 HH3/8-1.25(H) SOMT100420ER-GM Angle in ( ) is for SOMT14 Type
HH3/8-1.25(H) SOMT100420ER-LD
2500R-10-5T SB-4090TRPN Recommended Torque for PST-IP15 MP-1 - SOMT100420ER-FL Caution with Max. Revolution
PST-IP20 When running an end mill or a
2500R-10-6T Insert Clamp 3.5 N·m cutter at the maximum revolution,
3000R-10-7T HH1/2-1.25(H) the insert or cutter may be
MFH 2000R-14-4T - XNS610*2 damaged by centrifugal force.
2500R-14-4T HH3/8-1.25(H) Coat Anti-Seize Compound
HH3/8-1.25(H) (MP-1) thinly on portion of taper and
2500R-14-5T
3000R-14-5T TTP-20 HH1/2-1.25(H) SOMT140520ER-GM thread prior to installation.
3000R-14-6T SB-50120TRP Recommended Torque for MP-1 HH1/2-1.25(H) - SOMT140520ER-LD *1 For prolonged insert and cutter
- SOMT140514ER-FL
4000R-14-6T Insert Clamp 4.5 N·m life, it is recommended to use the
4000R-14-7T - pre-set torque wrench to ensure
5000R-14-7T - proper insert screw force.
6000R-14-8T - Pre-Set Torque Wrench sold
Recommeded Cutting Conditions F11 separately.
(H) Optional coolant thru bolt available.
*2 Differential screw (3/8-24UNF)
F4 kyocera@kyocera-tools.ru U.S. Stock Standard :
www.kyocera-tools.ru World Express (Shipping: 7-10 Business Days) :