Kyocera - Каталог фрезерование 2017 ENG
MECX для заказа - kyocera@kyocera-tools.ru Shouldering Slotting Facing
MECX Face Mill
D1 D1
d d GRADES A
bb
Stock S LINEUP / INSERTS 45 / 70 LEAD B
Unit H C
No. of Inserts E D
a E
E F
a S G
H H
J
d2 d2 0° K
d1 0 d1 0 O
D Fig.1 D Fig.2
Toolholder Dimensions Dimensions Rake Coolant Hole Spare Parts Max
Angle Drawing Insert Screw Wrench Arbor Bolt RPM
Part Number
(°) Weight (kg)
D D1 d d1 d2 H E a b S A.R. R.R. 75 LEAD
(Max)
MECX 1250R-07-8T 8 1.250 1.181 -8.9° 0.15 33,600
1500R-07-10T 30,500
2000R-07-12T 0.630 0.417 1.575 0.807 Fig.5 27,700
2500R-07-14T 24,900
10 1.500 1.496 -8.4° 0.25 90 LEAD
inch 0.75 0.187 0.313 0.236 +7° Yes SB-2042TRG DTM-6 HH3/8-1.25H
12 2.000 0.646 -8.3° 0.125
1.575 0.417 1.575 0.819 Fig.6
14 2.500 0.630 -7.9° 0.50
MECX 032R-07-8T-M 8 32 30 16 14 8.5 20 5.5 8.5 -8.9° 0.15 HH8x25H 33,600 HIGH FEED
HH10x30H 30,500
38 40 6 Fig.1 27,700
18 12 22 6.3 10.4 24,900
040R-07-10T-M 10 40 22 -8.4° 0.25
50 40
mm +7° Yes SB-2042TRG DTM-6 MULTI-FUNCTION SLOT MILLS RADIUS / BALL-NOSE OTHER APPLICATIONS TOOL HOLDING SPARE PARTS
050R-07-12T-M 12 -8.3° 0.35
Fig.2
063R-07-14T-M 14 63 -7.9° 0.50
Coat Anti-seize Compound (MP-1) thinly on portion of taper and thread when insert is fixed Recommended Cutting Conditions E26
Max. Revolution
When running the end mill and cutter at the maximum revolution, the insert or toolholder may be damaged by centrifugal force.
• To obtain a smooth shoulder wall finish using step milling, set D.O.C. within 0.197" for each cut.
Applicable Inserts Selecting Chipbreaker Cutting Force Comparison
Applicable Inserts B18
Large 1045
Part Number Vc = 490 sfm
1,500 D.O.C. ae = 0.197”0.197”
fz =0.003 ipt
D.O.C. = 0.118”
D.O.C.
Cutting Force (N) 1,000
MECX...-07... BDMT BDMT 500
0703ER-JT 0703ER-JS
Small fz = 0.004 ipt Large 0
Small Feed Rate MECX-JT MECX-JS Competitor A Competitor B
Warning Please observe below precautions fully. Max Balance quality grade G TECHNICAL P
Failure to observe the precautions may cause serious damage to human body. RPM ISO 1940-1 / 8821 R
(JIS B0905) T
Warning about Max. Revolution indicated on main body ~20,000 G16
~30,000 G6.3
1. W hen running the end mill and the face mill at revolutions exceeding the maximum revolution limit, the inserts or toolholder may be 30,000~ G2.5
damaged due to the centrifugal force.
INDEX
2. For actual practical revolution, please set within recommended cutting condition.
3. When using at a higher revolution (over 10,000min-1), refer to the table to adjust the balance of MECX and suitable arbor.
: U.S. Stock Standard kyocera@kyocera-tools.ru E25
: World Express (Shipping: 7-10 Business Days) www.kyocera-tools.ru