Kyocera - Основной каталог 2011-2012 ENG
для заказа - kyocera@kyocera-tools.ru
Recommended Cutting Conditions
3ZFKS (Short), 3ZFKM (Medium)
Application Workpiece Material Depth of Cut (apae) (mm) Outside Dia. Dc (mm) 3 4 5 6 7 8 10 12
Shouldering Spindle Revolution 13,800 10,700 8,800 7,500 6,600 6,000 4,800 4,000
min-1 1,200 1,100 1,000 910 850
170 160 150 120 100
Carbon Steel Short Shouldering 850 950 1,100 730 750 780 800 750
SxxC 1.2Dc0.3Dc 7,400 6,500 6,000 4,700 3,500
Feed Rate Plunge 180 170 170
Medium (mm/min) milling
1.5Dc0.3Dc
Plunge Slotting
milling
1Dc Slotting 570 650 700
Spindle Revolution 10,600 9,300 8,300
min-1
Alloy Steel Shouldering 700 780 900 980 900 850 750 700
SCM, SNCM 120 130 140 130 130 120 100
Solid End Mill Shouldering Feed Rate Plunge 120 540 570 590 610 600 580 500
Pre-hardened steel (mm/min) milling 4,000 3,200 2,600 2,300 2,000 1,600 1,400
BQ NAK, 30~45HRC 440 490 490 490 440 400 370
BQ BF Short Slotting 500 110 110 130 110 100 80 70
Shouldering 1.2Dc0.3Dc
Spindle Revolution
Medium min-1 5,200
1.5Dc0.3Dc
Plunge Slotting
milling
Shouldering 440
0.5Dc
Feed Rate Plunge 90
(mm/min) milling
Slotting 220 270 270 320 330 330 230 200
Spindle Revolution 3,300 2,500 2,000 1,700 1,400 1,300 1,100 900
min-1
Stainless Steel Shouldering 280 270 330 340 330 330 350 320
SUS Shouldering Feed Rate Plunge 20 30 40 40 40 30 20 20
(mm/min) milling
Short
Plunge milling 1.2Dc0.2Dc Slotting 110 110 130 140 130 130 120 120
Slotting Medium Spindle Revolution
1.5Dc0.2Dc min-1
3,300 2,500 2,000 1,700 1,400 1,300 1,100 900
Plunge Slotting
milling
Shouldering 280 270 330 340 330 330 350 320
0.5Dc
L Titanium Alloys
Feed Rate Plunge 20 30 40 40 40 30 20 20
(mm/min) milling
Slotting 110 110 130 140 130 130 120 120
• Compressed air is recommended for cutting steel.
• Water soluble coolant is recommended for machining stainless steel and titanium alloys.
• Adjust depth of cut (ap) to suit machine rigidity
L40 для заказа - kyocera@kyocera-tools.ru www.kyocera-tools.ru