Kyocera - Основной каталог 2011-2012 ENG
для заказа - kyocera@kyocera-tools.ru
Classification of usage P Carbon Steel / Alloy Steel Ref. Page for Toolholder
Applicable Inserts (TKF16) Continuous-Low Interruption / 1st Choice Stainless Steel
Continuous-Low Interruption / 2nd Choice Cast Iron
Non-ferrous Metals
Continuous / 1st Choice
Continuous / 2nd Choice
Dimension (mm) Angle MEGA PVD Carbide
(°) COAT Coated KW10
Insert Description D r PR1225 Carbide RL
RL
Handed Insert shows Right-hand W max T H d PR1025
E RL
S
) 5 ) 5) 5 ) 5 TKF16 150-S-16DR 1.5
%NBY 16 0.05 4 9.5 5 16°
8
S 200-S-16DR 2.0
Right lead angle
E TKF16 150-S 1.5
S 200-S 16 0.05 4
8
S %NBY 2.0
9.5 5 0°
E TKF16 150-T-16DR 1.5 H
S 16 0.08 4 9.5
8
S %NBY
5 16°
0°
Right lead angle 200-T-16DR 2.0 20°
Tough Edge 0°
H8
E
S TKF16 150-T 1.5 Cut-off
16 0.08 4 9.5
8 %NBY
S
5
200-T 2.0
Tough Edge
E ) 5) 5 TKF16 150-NB-20DR 1.5
S 16
8
S %NBY 200-NB-20DR 2.0
0 4 9.5 5
Right lead angle / Without Chipbreaker
E TKF16 150-NB 1.5
S 16 0
S8
%NBY
4 9.5 5
200-NB 2.0
Without Chipbreaker
Lead angle shows the angle when installed in toolholder.
As Fig.1 of H8 shows, the cutting diameter of the insert is indicated when the top of the cutting edge progresses 1mm from the center.
: Std. Item Inserts are sold in 10 piece boxes.
для заказа - kyocera@kyocera-tools.ru www.kyocera-tools.ru H7