Kyocera - Основной каталог 2011-2012 ENG
для заказа - kyocera@kyocera-tools.ru
Description A T d (mm)
4.76 4.4
TPGW 1604_ 9.525 11°
Edge Prep. Classification of usage Gray Cast Iron (With Scale)
Symbol Cutting Edge Spec. Example : Interruption / 1st Choice K Gray Cast Iron (Without Scale) C
SSSS
E R Honed rrrrE008 R0.08mm Honed :Interruption / 2nd Choice Nodular Cast Iron (Without Scale)
T Chamfered d dd dT012150.12mm X 15°:Light Interruption / 1st ChoiceSintered Steel
Cutting Edge Chamfered Cutting Edge
No. of Edges:Light Interruption / 2nd ChoiceHard Materials (Roughing)
KBN65B
S Chamfered and KBN510S012250.12mm X 25° Chamfered: Continuous / 1st Choice H Hard Materials (Finishing)
Honed Cutting Edge KBN525and Honed Cutting Edge: Continuous / 2nd Choice
KBN05MHard Materials (Chip Control)
KBN10M
KBN25MDimensionCBNPVD
KBN30M(mm)
KBN35MMEGACOAT CBN coated
KBN60Mr SCBN
KBN65M
Insert KBN70MDescription(PreviousEdge
Description) Prep.
Ref. Page for Toolholder
CBNTPGW 160404T00815ME TPGW 160404ME0.4 1.8
T00815 3
A T 160408T00815ME 160408ME 0.8 1.5
Multi Edge
TPGW 160404S01035MET TPGW 160404ME-T 0.4 1.8
S01035 3
A T 160408S01035MET 160408ME-T 0.8 1.5
Multi Edge / Tough -
TPGW 160404T00815SE TPGW 160404SE 0.4 1.8
T00815 1
A T 160408T00815SE 160408SE 0.8 1.5
Small Edge
TPGW 160404S01035SET TPGW 160404SE-T 0.4 1.9
S01035 1
A T 160408S01035SET 160408SE-T 0.8 1.8
Small Edge / Tough
: Std. Item (1 pc boxes) CBN & PCD Tools are sold C13
: Check Availability in 1 piece boxes.
для заказа - kyocera@kyocera-tools.ru www.kyocera-tools.ru