Kyocera - Основной каталог 2010-2011 ENG

                                                                   для заказа - kyocera@kyocera-tools.ru

Recommended Cutting Conditions

 Cutting Conditions Table                               M31, MSP15 M39)

Recommended Cutting Conditions (MSD45

                                                                 Recommended Insert Grade (Cutting Speed Vc: m/min)

                       fz                               Cermet                           PVD Coated Carbide                         Carbide            PCD
                    (mm/t)
Workpiece Material                              TN60
                                                         TN100M

                                                                  TC60
                                                                           PR630
                                                                                    PR730
                                                                                             PR830
                                                                                                                         PR660
                                                                                                                                  PR905
                                                                                                                                           PW30
                                                                                                                                                    KW10
                                                                                                                                                             KPD001
                                                                                                                                                                      KPD010

Stainless Steel           ~0.25                         120~200 120~200 120~200 120~200                      100~200                80~120

Carbon Steel               ~0.3                 150~220 120~200 120~200 120~200 120~200                      100~180                80~150

Alloy Steel                ~0.3                 120~200 100~180 100~180 100~180 100~180                      80~150                 80~150

Mold Steel                ~0.25 120~200 100~180 100~180 80~150 80~150                                        60~130                 80~150

Cast Iron                  ~0.3                                                                                       100~200               80~150

Non-ferrous Metals         ~0.2                                                                                                               100~300 300~800 300~800
                                                                                                             : 1st Recommendation : 2nd Recommendation

Recommended Cutting Conditions (MSO45 09 M34)

                                                                 Recommended Insert Grade (Cutting Speed Vc: m/min)

                       fz                               Cermet                           PVD Coated Carbide                         Carbide            PCD
                    (mm/t)
Workpiece Material                              TN60
                                                         TN100M

                                                                  TC60
                                                                           PR630
                                                                                    PR730
                                                                                             PR830
                                                                                                                         PR660
                                                                                                                                  PR905
                                                                                                                                           PW30
                                                                                                                                                    KW10
                                                                                                                                                             KPD001
                                                                                                                                                                      KPD010

  Stainless Steel         ~0.25                         120~200  120~200 120~200                             100~200
    Carbon Steel          ~0.3
                          ~0.3                          120~200  120~200 120~200                             100~180
     Alloy Steel          ~0.25
     Mold Steel           ~0.3                          100~180  100~180 100~180                             80~150
      Cast Iron           ~0.2
Non-ferrous Metals                                      100~180  80~150 80~150                               60~130

                                                                                                                      100~200               80~150

                                                                                                                                             100~300
                                                                                                             : 1st Recommendation : 2nd Recommendation

Recommended Cutting Conditions (MSE15                   M39)

                                                        Cermet   Recommended Insert Grade (Cutting Speed Vc: m/min)

                       fz                                                                PVD Coated Carbide                         Carbide            PCD                    M
                    (mm/t)
Workpiece Material                              TN60
                                                         TN100M
Stainless Steel     ~0.25
 Carbon Steel       ~0.25                                         TC60
                    ~0.25                                                  PR630
  Alloy Steel       ~0.25                                                           PR730
  Mold Steel                                                                                 PR830
   Cast Iron           -                                                                                                 PR660
                                                                                                                                  PR905
                                                                                                                                           PW30
                                                                                                                                                    KW10
                                                                                                                                                             KPD001
                                                                                                                                                                      KPD010
                                                                                                                                                                    Milling
                                                        120~200 120~200 120~200 120~200
                                                        120~200 120~200 120~200 120~200
                                                        100~180 100~180 100~180 100~180
                                                        100~180100~180 80~150 80~150

Non-ferrous Metals                           -

                                                                                                             : 1st Recommendation : 2nd Recommendation

Recommended Cutting Conditions (DMC / DMC-SX M78)

                                                Recommended Insert Grade (Cutting Speed Vc: m/min)                                  Max. ap (mm)

                                                Cermet                           PVDCoated Carbide           Carbide
                    fz
Workpiece Material     (mm/t)                                                                                                       Cutting  Slotting  Shouldering
                               TN60                                                                                                   Dia.     (ap)     (apae)
                                        TN100M                                                                                       (D)
                                                 TC60
                                                         PR630
                                                                  PR730
                                                                          PR830
                                                                                                    PR660
                                                                                                             PR905
                                                                                                                     PW30
                                                                                                                              KW10

Stainless Steel     ~0.15                       120~200 120~200 100~200 120~200                                                     ~12     1.5       42
                                                120~200 120~200 100~200 120~200                                                     14~      2        62
Carbon Steel        ~0.2                        100~180 100~180 100~180 100~180                                                     ~12      2        62
                                                100~180 100~180 80~150 80~150                                                       14~      3        93
Alloy Steel         ~0.2                                                                                                            ~12      2        62
                                                                                                                                    14~      3        93
Mold Steel          ~0.15                                                                                                           ~12      2        62
                                                                                                                                    14~      3        93
Cast Iron           ~0.2                                                                                              80~150        ~12      2        62
                                                                                                                      100~300       14~      3        93
Non-ferrous Metals  ~0.2                                                                                                            ~12      2        62
                                                                                                                                    14~      3        93

Use DMC8 with d = 6mm Max. for shouldering.                                                                  : 1st Recommendation : 2nd Recommendation

                                                        kyocera@kyocera-tools.ru                                                                                              M141
                                                           www.kyocera-tools.ru