Kyocera - Основной каталог 2010-2011 ENG
для заказа - kyocera@kyocera-tools.ru Bolt Countersinking Shouldering Facing
Fig.1
MEF Bolt Countersink Endmill
Fig.2
MEF
+0 Ds
-0.2
DL dh7
L
Standard (Straight)
Fig.3
Standard (Weldon)Std. Dimension (mm) Std. Corner-R(r)Rake Angle Spare Parts
No. of Insert DL Ds d L Drawing(°)
Toolholder Dimensions Objective Clamp Screw Wrench Applicable Inserts
A.R. R.R. Bolt Size M15
Description
MEF 11-S10 1 11 3.0 10 103 23 M6 SB-2250TR
14-S12 14 4.5 12 108 28
17-S16 -13° M8
18-S16 17.5 7.3 115 35 M10
2 18 7.7 117 38
16 -
20-S16 20 9.5 120 0.4 0.4 M12 DT-7 SPMT060204E-Z
22-S20 22 11.4 124 44 - SB-2260TR 060208E-Z
23-S20 23 12.4 20 126 46 -12° M14
24-S20 24 13.4 128 48 -
Cylindrical
25-S20 25 14.4 25 130 50 -
25-S25
26-S25 3 26 9.8 132 52 Fig.1 -
M16
27-S25 27 10.6 134 54 -
28-S25 28 11.5 25 136 56 +5° -
29-S25 29 12.6 138 58 -13° M18
30-S25
M 32-S25 30 13.5 140 60 - SB-3080TR DT-10 SPMT090304E-Z
M20 090308E-Z
32 15.5 144 64
35-S32 35 18.4 150 70 M22
39-S32 4 39 22.5 32 158 78 0.8 M24
43-S32 43 26.2 166 86 M27
48-S32 -12° M30
48 31.3 176 96
Milling MEF 15-S12-80W 1 15 4.6 12 80 30 -13° Fig.2 M8 SPMT060204E-Z
Weldon 18-S16-90W M10 060208E-Z
20-S16-90W 2 18 7.5 16 90 36 SB-2260TR DT-7
20 8.3 40
-12° M12
26-S25-120W 3 26 9.8 25 120 52 M16 SPMT090304E-Z
33-S25-140W 33 16.5 140 66 -13° Fig.3 M20 090308E-Z
40-S32-160W SB-3080TR DT-10
M24
4 40 23.3 32 160 80
• Before machining, the workpiece must have a hole with diameter larger than Ds.
• Although Corner R(r) pertains to MEF11-S10, Ds=3.0mm.
Applicable Inserts Description
Insert SPMT 060204E-Z
060208E-Z
SPMT 090304E-Z
090308E-Z
Bolt Counter Sink (Hexagon Socket Head Cap Screw)
D
Nominal M6 M8 M10 M12 M14 M16 M18 M20 M22 M24 M27 M30
Screw Size
H
D (mm) 11 14 17.5 20 23 26 29 32 35 39 43 48
d
H (mm) 6.5 8.6 10.8 13 15.2 17.5 19.5 21.5 23.5 25.5 29 32
d (mm) 6.6 9 11 14 16 18 20 22 24 25 30 33
Applicable Endmill MEF11 MEF14 MEF17 MEF20 MEF23 MEF26 MEF29 MEF32 MEF35 MEF39 MEF43 MEF48
M136 : Std. Item : Check Availability R : Std. Item (R-hand Only) L : Std. Item (L-hand Only)
kyocera@kyocera-tools.ru
www.kyocera-tools.ru