Kyocera - Основной каталог 2010-2011 ENG
для заказа - kyocera@kyocera-tools.ru
Multi-Function Machining Endmill
Cutting Performance of Silver Drill Mill / Drill Mill [Workpiece Material: C50 (S50C)]
Cutting Description Overhang Length: A (mm) Cutting Description Overhang Length: A (mm) Shape
Dia. Dia.
MEZ16-S16G 31 [~61] (Not Recommended) MEZ32-S32G 50 [~80] (Not Recommended)
- 80 [~110]
16 MEZ16-S16-140HG - ~61 [~91] 32 MEZ32-S32-180HG - 90 ~110
55 [~85] [~115]
MEZ16-S16-190G - 61 ~91 MEZ32-S32-230G ---
55 ~85 ~115
MEZ20-S20G 33 [~63] (Not Recommended) MEZ40-S32G 70 [~100] [~130]
20 MEZ20-S20-150HG ---
- ~63 [~93] 40 - 70 ~100 ~130
MEZ20-S20-200G - 63 ~93 MEZ40-S32-240G A
MEZ25-S25G 40 [~70] (Not Recommended) MEZ50-S42G
25 MEZ25-S25-170HG - 70 [~100] 50 -
MEZ25-S25-220G - 80 ~100 MEZ50-S42-250G
• When using in [ ] dimension, be careful that the chucking length to the shank may get too short.
Description Shouldering (Cutting Width ae =D/2) Slotting
Part ae=D/4 Ramping • Helical Milling
MEZ16-S16G
MWZ16 20 10
15
-S16-140HG 10ap (mm) ap (mm) 5
MEZ16
5 0
-S16-190G 0
0.05 0.1 0.15
MEZ20-S20G 0.05 0.1 0.15 0.15
MEZ20 fz (mm/t) fz (mm/t) 0.15
0.15
-S20-150HG 20 10 0.15
MEZ20- 15 0.15
10ap (mm) ap (mm) 5
S20-200G
5 0
MEZ25-S25G 0
MEZ25 0.05 0.1
0.05 0.1 0.15
M -S25-170HG fz (mm/t) fz (mm/t)
MEZ25 20 10
-S25-220G 15
10ap (mm) ap (mm) 5
MEZ32-S32G
MEZ32 5 0
0
-S32-180HG 0.05 0.1
MEZ32 0.05 0.1 0.15
fz (mm/t) fz (mm/t)
-S32-230G
Milling 20 10
MEZ40-S32G 15
MEZ40 10ap (mm) ap (mm) 5
-S32-240G 5 0
0
MEZ50-S42G 0.05 0.1
MEZ50 0.05 0.1 0.15
fz (mm/t) fz (mm/t)
-S42-250G
20 10
15
10ap (mm) ap (mm) 5
5 0
0
0.05 0.1
0.05 0.1 0.15
fz (mm/t) fz (mm/t)
20 10
15
10ap (mm) ap (mm) 5
5 0
0
0.05 0.1
0.05 0.1 0.15
fz (mm/t) fz (mm/t)
M92 kyocera@kyocera-tools.ru
www.kyocera-tools.ru