Kyocera - Основной каталог 2010-2011 ENG
для заказа - kyocera@kyocera-tools.ru
Inserts for drilling (for DRS type / DRZ type)
Applicable Insert Classification of usage P Carbon Steel / Alloy Steel PR660
Mold Steel PR830
(for DRS type / DRZ type) : 1st Recommendation M Stainless Steel PR915
: 2nd Recommendation K Cast Iron PR1025
Shape (Steel; non heat treated) N Non-ferrous Metals PR930
PR905
PR510
KW10 Carbide
Ref. Page for Toolholder
Dimension (mm) Angle PVD
(°) Coated Carbide
Description
A T d W r
DS 100 8.8 3.5 9.0
105 9.3 3.7 - 9.7 0.2 - K38
110 9.8 3.9 10.0
K40
115 10.2 4.1 10.3 K47
120 10.8 4.3 10.9 0.25
ZCMT 050203 5.9 2.38 2.3 5.0 0.3
06T204 7.0 2.80 2.5 6.0
080304 9.7 3.18 2.9 8.2 0.4
10T304 12.0 3.97 4.4 10.4 7°
12T306 14.3 3.97 5.6 12.8 0.6
150408 17.8 4.76 5.6 15.8 0.8
200608 22.8 6.35 6.5 20.3
ZCMT 050203SP 5.9 2.38 2.3 5.0 0.3 ~
06T204SP 7.0 2.80 2.5 6.0
080304SP 9.7 3.18 2.9 8.2 0.4 7°
10T304SP 12.0 3.97 4.4 10.4
For Sharp Cutting / 12T304SP 14.3 3.97 5.6 12.8
Deeper Drilling
150406SP 17.8 4.76 5.6 15.8 0.6
A ZCMT 050203SU 5.9 2.38 2.3 5.0 0.3 7° K
d 06T204SU 7.0 2.80 2.5 6.0 0.4
WT
For Stainless Steel Drilling
* Features of SP Chipbreaker…1. Less cutting resistance due to large rake angle.
2. Suitable for chip control of sticky materials such as stainless steel or soft steel.
3. Larger size inserts have smaller corner-R (r) than standard chipbreaker type and can reduce burrs.
Suitable Chipbreaker (ZCMT type)
Workpiece Insert Size ZCMT05 ZCMT06 ZCMT08
Material Chipbreaker
Cutting Depth Standard SP SU Standard SP SU Standard SP
2D 3D 4D 2D 3D 4D 2D 3D 4D 2D 3D 4D 2D 3D 4D 2D 3D 4D 2D 3D 4D 2D 3D 4D
Low Carbon Steel - --- - -
Carbon Steel --- ---
Alloy Steel --- ---
Mold Steel --- ---
Stainless Steel - ---- -
Cast Iron --- ---
Aluminum Alloy --- ---
Brass --- ---
Titanium Alloy --- ---
Workpiece Insert Size ZCMT10 ZCMT12 ZCMT15 ZCMT20
Material Chipbreaker
Cutting Depth Standard SP Standard SP Standard SP Standard
2D 3D 4D 5D 2D 3D 4D 5D 2D 3D 4D 5D 2D 3D 4D 5D 2D 3D 4D 5D 2D 3D 4D 5D 2D 3D 4D
Low Carbon Steel -- -- --
Carbon Steel
Alloy Steel
Mold Steel
Stainless Steel -- -- --
Cast Iron
Aluminum Alloy
Brass
Titanium Alloy
Standard chipbreakers (without symbol) may function better with interrupted cutting. : 1st. Recommendation : 2nd. Recommendation
When machining aluminum, chips become long and difficult to be discharged at the depth over 2D.
5D type is the same as 4D type.
: Std. Item : Check Availability R : Std. Item (R-hand Only) L : Std. Item (L-hand Only) Inserts are sold
in 10 piece boxes
kyocera@kyocera-tools.ru K37
www.kyocera-tools.ru