Kyocera - Основной каталог 2010-2011 ENG
для заказа - kyocera@kyocera-tools.ru [Solid]
System Tip-Bar for Micro Internal Grooving
VNG
L2 1
22 A
F
L4W
T
HL1
W 0.03 (Edge enlarged)
Right-hand shown
Classification of usage P Carbon Steel / Alloy Steel
M Stainless Steel
: Continuous / 1st Choice K Cast Iron TC60 Cermet
PR630
: Continuous / 2nd Choice N Non-ferrous Metals PR915
PR930
S Titanium Alloy KW10 Carbide
KPD001
Insert Dimensions H Hard materials (under 40HRC) KPD010
Description Hard materials (over 40HRC)
Ref. Page for Toolholder
Min. Dimension (mm) GroovingPVDPCD G
Cutting Coated
Carbide
Dia.
A W r D H L1 L2 L3 L4 F T
VNGR 0410-11 1.0 0.05
0420-11 4 2.0 0.10 3.5 0.8
0510-11
0520-11 1.0 0.05 30.8 11 0.1
0610-20
0620-20 5 4.4 1.0
0710-20 2.0 0.10
0720-20 - 3.9 -
1.0 0.05
6 5.2 1.8
2.0 0.10
39.8 20 0.3
1.0 0.05
7 6.2 2.0 F12
2.0 0.10 F13
F14
VNGR 0410-11NB 1.0 0.05
0420-11NB 4 3.5 0.8
0510-11NB 2.0 0.10
0520-11NB 30.8 11 0.1
0610-20NB 1.0 0.05
0620-20NB 5 4.4 1.0
0710-20NB 2.0 0.10 -
0720-20NB 1.0 0.05 3.9 -
6 5.2 1.8
2.0 0.10
39.8 20 0.3
1.0 0.05
7 6.2 2.0
2.0 0.10
• Dimension T shows available grooving depth.
• Dimension L4 indicates the cutting edge is above the Tool’s Center Position.
Recommended Cutting Conditions
Recommended Insert Grade (Cutting Speed: m/min)
Cermet PVD Coated Carbide Carbide VNG04 VNG06
VNG05 VNG07 Remarks
Workpiece Material TC60
PR630
PR930 f (mm/rev)
KW10
Carbon Steel / Alloy Steel 60 120 30 100 30 100 0.03 0.05
Stainless Steel 50 100 30 80 30 80 Coolant
0.02 0.03
Non-ferrous Metals 300 0.05 0.08
: 1st Recommendation : 2nd Recommendation
: Std. Item : Check Availability System Tip-Bars (VNG) are CBN & PCD Inserts are sold
R : Std. Item (R-hand Only) L : Std. Item (L-hand Only) kyocera@kyocera-tools.rsuold in 5 piece boxes.
in 1 piece boxes. G33
www.kyocera-tools.ru