Kyocera - Основной каталог 2010-2011 ENG
KGM для заказа - kyocera@kyocera-tools.ru CERACUT Plunge&Turn
T Width: 3.0~8.0mm
5 L2
F1 H3 B
W
h H2 H1
Right-hand shown A L1
Toolholder Dimensions
Std. Dimension (mm) Width Spare Parts
W (mm)
Screw Wrench
MIN. MAX.
Description
R L H1=h H2 H3 B L1 L2 F1 A T
KGM 1212H-3 12 4 6 12 100 10.8 3.0 3.0 SB-5TR - LTW-20 -
1616H-3 16 7 16 125 LW-4
2020K-3 20 27 14.8 2.4 9 3.0 4.0 - HH5X16 - LW-4 G
2525M-3 7 18.8 LW-4
20 -
25 25 150 23.8 HH5X25
2020K-4 20 - 7 20 125 27 18.3 3.4 10 4.0 5.0 - HH5X16 -
2525M-4 25 25 150 23.3 HH5X25
2020K-5 20 20 125 17.8 HH5X16
F1
2525M-5 25 - 7 25 150 27 22.8 4.4 10 hW 5.0 6.0 - HH5X25 -
3232P-5 32 32 170 29.8 H2
H1 H3 B
2525M-8 25 7.5 10.5 25 150 40 22.0 6.0 25 8.0 8.0 - HH6X25 - LW-5
3232P-8 32 - 32 170 Grooving29.0
• Dimension T shows available grooving depth.
• 4.0mm width Insert can be installed in KGM 1212H-3, but is not recommended due to the toolholder’s rigidity.
KGM-T (Deep Grooving Type) Width: 2.0~6.0mm
T
L2
5
Right-hand shown A L1
Toolholder Dimensions Std. Dimension (mm) Width Spare Parts
Description R L H1=h H2 H3 B L1 L2 F1 A W (mm)
MIN. MAX. Screw Wrench
T
KGM 2012K-2T17 20 12 125 11.15 SB-5TR - LTW-20 -
2020K-2T17 - HH5X16 - LW-4
2525M-2T17 20 - 7 20 125 33 19.15 1.7 17 2.0 3.0 - HH5X25 - LW-4
1616H-3T20 3.0 4.0 HH5X16
2012K-3T20 25 25 150 24.15 4.0 5.0 SB-5TR LTW-20 -
2020K-3T20 - - - LW-4
2525M-3T20 16 4 16 100 14.8 HH5X16
2020K-4T20 - HH5X25 - LW-4
2525M-4T20 20 - 7 12 125 36 10.8 2.4 20 HH5X16
2525M-4T25 20 - 20 125 18.8 LW-4
2525M-5T25 HH5X25 LW-4
3232P-5T25 25 - 25 150 23.8
2525M-6T30
20 20 125 36 18.3 20
25 - 7.5 25 150 36 23.3 3.4 20
25 25 150 41 23.3 25
25 - 8.5 25 150 42 22.8 4.4 25 5.0 6.0 - HH5X25 -
32 32 170 29.8 6.0 6.0 - HH5X25 -
25 - 9.5 25 150 45 22.4 5.2 30
• Dimension T shows the distance from the Toolholder to the cutting edge. Refer to the Table (G21) for the relationship between the available Grooving Depth and the Cutting Dia.
• When using GMG / GMM type (2-Edge) insert, set the groove depth under 15mm.
: Std. Item : Check Availability R : Std. Item (R-hand Only) L : Std. Item (L-hand Only)
kyocera@kyocera-tools.ru G23
www.kyocera-tools.ru