Kyocera - Основной каталог 2010-2011 ENG
для заказа - kyocera@kyocera-tools.ru
Positive Edge Prep. Classication of usage Non-ferrous Metals (with interruption) No. of Edge
: Light Interruption / 1st Choice KPD001
All Items Sharp Edge : Light Interruption / 2nd Choice N Non-ferrous Metals (without interruption) KPD010
: Continuous / 1st Choice
: Continuous / 2nd Choice Titanium Alloy (with interruption) Ref. Page for Toolholder
S Titanium Alloy (without interruption) PCD
Dimension (mm) Angle PCD
(°)
Insert Description A T d r S C
Handed Insert shows Left-hand TPMH 080201NE 0.1 2.3 E22
TPMH 080202NE 0.2 2.2 F55
10 TPMH 080204NE 0.4 2.1 F58
AT TPMH 080208NE 0.8 1.8
S TPMH 080201 4.76 2.38 2.3 F55
r 080202 0.1 2.6 F58
TPMH 080204 0.2 2.5
d TPMH 080208 0.4 2.3
TPMH 090201NE 0.8 2.0
10S 090202NE 0.1 2.7
AT r TPMH 090204NE 0.2 2.6
TPMH 090208NE 0.4 2.5
10 d TPMH 090201 0.8 2.2
AT 090202 5.56 2.38 3.0
090204 0.1 3.0
10 090208 0.2 2.9
AT 0.4 2.8
110301SE 0.8 2.5
10
AT 110302SE 0.1 2.7
10° 110304SE 0.2 2.6
Small Edge S 110301NE 0.4 2.5 E22
Small Edge r 110302NE F55
110304NE 0.1 3.4 F57
d 110308NE 6.35 3.18 3.3
110301 1
110302 0.2 3.3
S 110304 0.4 3.2
r 110308
11°
d 160301SE 0.8 2.9
0.1 3.9
160302SE 0.2 3.9
0.4 3.7
160304SE 0.8 3.4
160301NE 0.1 2.6
160302NE
160304NE 0.2 2.6
160308NE
S 160301 0.4 2.4 F55
r 160302 F57
160304 0.1 3.5
d 160308 9.525 3.18 4.5 E22
F55
0.5xS S 110302$-NE 0.2 3.4 F57
r 0.4 3.3
0.8 3.0
d 0.1 4.1
0.2 4.0
AT 110304$-NE 0.4 3.8
0.8 3.6
0.2 3.8
6.35 3.18 3.3
0.4 3.6
Suffix SE attached to a description means Small Edge and NE means New Value Edge.
: Std. Item : Check Availability R : Std. Item (R-hand Only) L : Std. Item (L-hand Only) CBN & PCD Tools are sold
in 1 piece boxes.
kyocera@kyocera-tools.ru C21
www.kyocera-tools.ru