Kyocera - Основной каталог 2010-2011 ENG

                                                                        для заказа - kyocera@kyocera-tools.ru                                                           MEGACOAT

     “PT600M” for Hard Materials / Gray Cast Iron

        With the use of MEGACOAT, it achieves a signicantly longer tool life approaching that of CBN.
B

          Wear comparison (for machining of hard materials)

                                0.12 Cutting Condition:

Insert (Turning)                0.09                      Competitor CBN B             Vc=100m/min, ap=0.2mm, f=0.1mm/rev, Wet
                                                                                       Workpiece Material: SCM415H (Hardened)
                Nose Wear (mm)
                                                                                                                                                       58~62HRC
                                0.06 Competitor CBN A

                                0.03                              PT600M               The wear resistance of PT600M is similar

                                0.00                                                   to that of competitor’s CBN A and B for
                                       0
                                          5  10 15 20 25 30 35 low speed machining of hard materials

                                                          Cutting Time (min)           (Vc=100m/min)

     Cell Fiber Ceramic “CF1” for Heat-resistant Alloy

     What is Cell Fiber?                                                                                  Core                       Prolonged tool life and acceleration of
                                                                                                                                   cutting of heat resistant alloy such as inconel
        Composite material consisting of high structure control
        composite core (gray part) and briform organization                                                        Shell
        of shell (white part)

     Features

        Consisting of polycrystaline ceramics material
           Superior heat and oxidation resistance
           Hardened / Superior wear resistance
           Superior fracture resistance by crack progress supression

     Comparison of Wear Resistance

             0.4

     Wear Width (mm)            0.3                                                    Notching Flank wear          Notching Flank wear

                                0.2                                                    Competitor C                                                              CF1

                                0.1                                                    

                                  0                                                    Workpiece: Inconel 718,
                                                                                       Tool geometry; RNGN120400
                                     Comp. C CF1 Comp. C CF1                           Vc =150m/min, ap =1mm
                                                                                        f =0.15mm/rev Wet Cutting
                                        Notching Flank wear

     Ceramic Inserts Identification System                                             04                       04                                               S01525

     Identication System

     C N G A 12

                                      Turning Indexable Inserts Identification System See page B2                                                                Edge Preparation
                                                                                                                                                                   (See Table.1)

     How to identify edge preparation                                                  Table-1
                                                                                       Edge Preparation

     Symbol Cutting Edge Spec.                                                Example                                                                            Shape

                                                                                                                                                                             0.15

     S                                Chamfered +         S01525  0.15mm X 25°                                                                                          25° Honed
                                      Honed Cutting Edge          Chamfered + Honed Cutting Edge

                                                                                                                                                                             0.20

     T Chamfered Cutting Edge T02025                              0.20mm X 25°                                                                                          25°
                                                                  Chamfered Cutting Edge
     See Page B3 for insert color.
                                                                                kyocera@kyocera-tools.ru
B80                                                                                www.kyocera-tools.ru