Kyocera - Монолитный осевой инструмент 2016 ENG
для заказа - kyocera@kyocera-tools.ru TAP DIMENSIONS
TAPS ENGINEERING DATA
SPECIAL FINE PITCH TAPS / SHORT SERIES
Tap Dimensions, Ground Thread
(Ref. USCTI Table 303)
DRILLS
Unless otherwise specified, special taps 1.010" to 1.510" diameter inclusive, having 14 or more END MILLS
threads per inch or 1.75mm pitch and finer, and sizes over 1.510" diameter with 10 or more
threads per inch, or 2.5mm pitch and finer, will be made to the general dimensions shown below: ROUTERS
Nominal Diameter Nominal Nominal Tap Dimensions - Inches
Range - Inches Fractional Metric
Diameter Diameter Overall Thread Square Shank Size of
Over To (Inc.) Millimeters, (in) Length Length Length Dia. Square THREAD MILLS
Inches d1 & TAPS
1.010 1.073 M27 L l l2 a
1.073 1.135 1 1/16 - 0.8960
1.135 1.198 1 1/8 4.00 1.50 0.88 0.6720
1.198 1.260 1 3/16 M30 4.00 0.6720
1.260 1.323 1 1/4 - 4.00 1.50 0.88 0.8960 0.7660
1.323 1.385 1 5/16 4.00 0.7660
1.385 1.448 1 3/8 M33 4.00 1.50 1.00 1.0210 0.8310
1.448 1.510 1 7/16 - 4.00 0.8310
1.510 1.635 1 1/2 4.00 1.50 1.00 1.0210 0.9250
1.635 1.760 1 5/8 M36 4.00 0.9250
1.760 1.885 1 3/4 - 5.00 1.50 1.00 1.1080 0.9790 ENGRAVERS
1.885 2.010 1 7/8 5.00 1.0720
2.010 2.135 M39 5.00 1.50 1.00 1.1080 1.1390
2.135 2.260 2 M42 5.00 1.2330
2.260 2.385 2 1/8 5.25 1.50 1.00 1.2330 1.3270
2.385 2.510 2 1/4 - 5.25 1.4200
2.510 2.635 2 3/8 M48 5.25 1.50 1.00 1.2330 1.5140
2.635 2.760 2 1/2 5.25 1.5750
2.760 2.885 2 5/8 - 5.50 2.00 1.13 1.3050 1.5750 BORING BARS
2.885 3.010 2 3/4 M56 5.50 1.5750
3.010 3.135 2 7/8 5.50 2.00 1.25 1.4300 1.5750
3.135 3.260 - 5.50 1.5750
3.260 3.385 3 - 5.75 2.00 1.25 1.5190 1.5750
3.385 3.510 3 1/8 M64 5.75 1.5750
3.510 3.635 3 1/4 - 5.75 2.00 1.38 1.6440 1.5750
3.635 3.760 3 3/8 M72 5.75 1.5750
3.760 3.885 3 1/2 - 6.00 2.00 1.38 1.7690 1.5750
3.885 4.010 3 5/8 - 6.00 1.5750
3 3/4 M80 6.00 2.00 1.44 1.8940 1.5750 REAMERS
3 7/8 - 6.00 1.5750
- 2.00 1.44 2.0190
4 M90
- 2.00 1.50 2.1000
-
M100 2.00 1.50 2.1000
2.00 1.50 2.1000
2.00 1.50 2.1000
2.00 1.50 2.1000 SAWS
2.00 1.50 2.1000
2.00 1.50 2.1000
2.00 1.50 2.1000
2.00 1.50 2.1000 TECHNICAL
2.00 1.75 2.1000
2.00 1.75 2.1000
2.00 1.75 2.1000
2.00 1.75 2.1000
NOTES INDEX
For tolerances see Table 302.
For standard thread limits and tolerances for Unified Inch Screw Threads see Table 327A.
For standard thread limits and tolerances for Metric Threads see Tables 337 and 341.
For eccentricity tolerances of tap elements see Table 317.
kyocera@kyocera-tools.ru 201
www.kyocera-tools.ru