SPECIAL TAPS для заказа - kyocera@kyocera-tools.ru
(CONTINUED) STYLE GUIDE
HAND TAP TAPER
STRAIGHT
SPIRAL POINT TAP
DRILLS
SMALL SHANK EXTENSION TAP #7
PIPE EXTENSION TAP #10
These taps are made to conventional tap dimensions,
except that they have an extended shank to tap hard These taps are for producing standard straight END MILLS
to reach inaccessible holes. Thread length and shank or tapered pipe threads in a wide range of pipe
square are made to standard specifications listed on connections. Manufactured with the appropriate design ROUTERS
Page 200. These taps are designed with a smaller variations to cut specified pipe thread forms. These
shank diameter. Extension taps are available in both extension pipe taps have an extended shank to tap hard
hand and spiral point styles, and in small shank style. to reach or inaccessible holes. Thread length, shank
diameter, and shank square are made to standard
TAPER specifications listed on Page 204 (Standard Pipe Tap
Dimensions).
THREAD MILLS
STRAIGHT & TAPS
PIPE EXTENSION #11 ENGRAVERS
INTERRUPTED THREAD TAP
PIPE TAP #8 These taps are for producing standard tapered BORING BARS
pipe threads in a wide range of pipe connections.
These taps are for producing standard straight Manufactured with the appropriate design variations to
or tapered pipe threads in a wide range of pipe cut specified pipe thread forms. These extension pipe
connections. Manufactured with the appropriate design taps have an extended shank to tap hard to reach or
variations to cut specified pipe thread forms. inaccessible holes. Thread length, shank diameter, and
square are made to standard specifications listed on
Page 204 (Standard Pipe Tap Dimensions). These pipe REAMERS
extension taps feature interrupted threads which have an
PIPE INTERRUPTED THREAD TAP #9 odd number of lands with alternate teeth in the thread SAWS
helix removed. The removal of every other tooth helps to
These taps are for producing standard tapered break the chip and allows a greater supply of lubrication
pipe threads in a wide range of pipe connections. to reach the cutting teeth, reducing the incidence of torn
Manufactured with the appropriate design variations threads. Ideal for pipe tapping non-ferrous metals, low
to cut specified pipe thread forms. Thread length, carbon steel, as well as titanium and high hardness alloys.
shank diameter, and square are made to standard
specifications listed on Page 204 (Standard Pipe Tap TECHNICAL
Dimensions). These pipe taps feature interrupted threads
which have an odd number of lands with alternate teeth ACME THREAD TAP #12
in the thread helix removed. The removal of every other
tooth helps to break the chip and allows a greater supply Acme screw threads were devised to allow rotary and INDEX
of lubrication to reach the cutting teeth, reducing the transversing motion on machines; and are also used in
incidence of torn threads. Ideal for pipe tapping non- jacks, valves, presses and other mechanisms where heavy
ferrous metals, low carbon steel, as well as titanium and loads are encountered. The acme thread is characterized
high hardness alloys. by a 29° included angle. Acme taps typically require
specialized engineering and design due to the nature and
severity of cut required in producing Acme threads.
kyocera@kyocera-tools.ru 165
www.kyocera-tools.ru
