Ниже представлена эта же страница в формате, позволяющем производить копирование текста.

Kyocera - Каталог Токарный инструмент 2016 ENG

                                                                    для заказа - kyocera@kyocera-tools.ru

KGD RECOMMENDED CUTTING CONDITIONS

 R ecommended Cutting Conditions (PM / PH Chipbreakers)

                 Recommended Insert Grade (Vc sfm)                                    Feed Rate (ipr)                        AGRADES
                                                                       PM PH                                                 B
                                                                                                             Remarks         C
Workpiece        MEGACOAT                 MEGACOAT                Edge Width          Edge Width                             D
  Material          NANO                                         0.079"~0.158"                                               E
                   PR1535                                        (2mm~4mm)                                                   F
                           PR1225                       PR1215                        0.079"  0.095"~0.158"                  GINSERTS
                                                                                      (2mm)   (3mm~4mm)                      H
                                                                                                                             J
Carbon Steel                                                  0.0031~0.0071 0.0039~0.0098 0.0059~0.0110                   N
Alloy Steel      260~660   260~660                      330~660                                                              P
                                                                                                                             RCBN & PCD
                                                                                                                          T
                 230~590   230~590                      260~590
                                                                                                                      H21
                                                                                                             Wet

Stainless Steel                                               0.0024~0.0047 0.0020~0.0047 0.0031~0.0059
                 200~490   200~490                      200~490

Cast Iron        -                     -                        0.0031~0.0071 0.0039~0.0098 0.0059~0.0110                    TOOLHOLDERS SMALL TOOLS
                                                        330~660

                                                                        : 1st Recommendation  : 2nd Recommendation

 F eed Examples

                       PM Chipbreaker     (Workpiece Material : 1049)
            0.079”
Edge Width  ~0.158”                                                                                                           BORING

                           0.004          0.008         0.012

                                       Feed Rate (ipr)                                                                        GROOVING

                       PH Chipbreaker     (Workpiece Material : 1049)

Edge Width  0.095”                                                                                                            CUT-OFF
            ~0.158”
            0.079”

                           0.004          0.008         0.012

                                       Feed Rate (ipr)                                                                        THREADING

                                           : Indicates the center value of feed (f)

 CAUTION During Cut-Off

1) Flood coolant is recommended. Apply enough coolant to the cutting edge                                                     HSK TOOLING SPARE PARTS
2) Keep spindle revolution constant during processing to achieve longer tool life
3) Cut off as close to the chuck as possible
4) Reduce feed rate by 30-50% when diameter is same as cut-off insert width to prevent impact

                                                                                                                              TECHNICAL

                                                                                                                      INDEX

                                                                       kyocera@kyocera-tools.ru
                                                                          www.kyocera-tools.ru
Заявка