для заказа - kyocera@kyocera-tools.ru
CUT-OFF TOOLHOLDERS
KGD-S (0° SwitchBlade Style)
T
F1 H1 B
W
L2 H2 H3
h
Right-hand Shown A L1
T oolholder Dimensions (Inch Sizes)
Width (mm) Unit Part Number Stock Toolholder Blade Dimensions (in) Insert Width
Max. D.O.C. W
(Includes Toolholder Part Number Part Number
& Blade ) H8 G25
RL H1=h H2 H3 B L1 L2 F1 A T MIN MAX
0.669 KGD§ 12X-2T17S KGD§12-C 0.75 0.435 0.456 0.75 4.80 1.57 0.88 0.067 0.669
(17mm) (17mm)
2 KGD§-2T17-C 0.079 0.118
16X-2T17S KGD§16-C 1.00 0.291 0.456 1.00 5.78 1.57 1.13 0.067
0.394 KGD§ 12X-3T10S KGD§12-C 0.75 0.435 0.456 0.75 4.52 1.29 0.86 0.094 0.394
(10mm) (10mm)
KGD§-3T10-C
16X-3T10S KGD§16-C 1.00 0.291 0.456 1.00 5.51 1.29 1.11 0.094
3 0.118 0.158
0.669 KGD§ 12X-3T20S KGD§12-C 0.75 0.435 0.456 0.75 4.92 1.68 0.86 0.094 0.669
(17mm) (17mm)
KGD§-3T20-C
16X-3T20S KGD§16-C 1.00 0.291 0.456 1.00 5.90 1.68 1.11 0.094
0.394 KGD§ 12X-4T10S KGD§12-C 0.75 0.435 0.456 0.75 4.52 1.29 0.84 0.133 0.394
(10mm) (10mm)
KGD§-4T10-C
16X-4T10S KGD§16-C 1.00 0.291 0.456 1.00 5.51 1.29 1.09 0.133
CUT-OFF 0.787 KGD§ 12X-4T20S KGD§12-C 0.75 0.435 0.456 0.75 4.92 1.68 0.84 0.133 0.787
(20mm) (20mm)
H4 KGD§-4T20-C 0.158 0.197
16X-4T20S KGD§16-C 1.00 0.291 0.456 1.00 5.90 1.68 1.09 0.133
0.984 KGD§ 12X-4T25S KGD§12-C 0.75 0.435 0.456 0.75 5.11 1.88 0.84 0.133 0.984
(25mm) (25mm)
KGD§-4T25-C
16X-4T25S KGD§16-C 1.00 0.291 0.456 1.00 6.10 1.88 1.09 0.133
0.394 KGD§ 12X-5T10S KGD§12-C 0.75 0.435 0.456 0.75 4.52 1.29 0.82 0.173 0.394
(10mm) (10mm)
KGD§-5T10-C
5 16X-5T10S KGD§16-C 1.00 0.291 0.456 1.00 5.51 1.29 1.07 0.173 0.197 0.236
0.984 KGD§ 16X-5T25S KGD§16-C KGD§-5T25-C 1.00 0.291 0.456 1.00 6.10 1.88 1.07 0.173 0.984
(25mm) (25mm)
Note ) 1. When using the toolholder in normal mounting position, the lower jaw of toolholder may interfere with the tool presetter. Recommended Cutting Conditions H20~H21
2. The toolholder and blade descriptions are printed on the toolholder body. (Unit description is not printed.)
KGD-S: Right-hand Blade for Right-hand Toolholder, Left-hand Blade for Left-hand Toolholder.
The toolholder is applicable for all blades with suitable hand.
3. In case the unit number is not available (No unit number), please purchase toolholder and blade separately.
4. Dimension T : Shows max. groove depth. (If the dimension T is 20mm or more, the maximum groove-depth of groove made by the 2-edge insert will be 18 mm.)
5. Recommended tightening torque of clamp bolt for insert: 6.5N·m (Groove width 2~4mm)
6. Above toolholders are available for external grooving as well.
S pare Parts
Unit Clamp Bolt Spare Parts Wrench
Part Number (for Insert Clamp) Clamp Screw
(for Blade)
KGD§.....S BH6X10TR SB-60120TR LTW-25
H18 kyocera@kyocera-tools.ru U.S. Stock Standard :
www.kyocera-tools.ru World Express (Shipping: 7-10 Busines Days) :