для заказа - kyocera@kyocera-tools.ru Separate Type
FACE GROOVING TOOLHOLDERS [GVF IN SERT]
T oolholder Dimensions (Inch Size)
Face Spare Parts
Stock Dimensions (in) Grooving
Dia. D Clamp Set Wrench Blade Screw
Applicable Inserts GRADES
Part Number A
G116
R L H1 h H3 B L1 L2 F T MIN MAX
GFVS§ 12-351B 0.75 0.79 0.75 5.00 1.18 1.00 0.20 35 50 SF§-351B GVF§250~350-020B INSERTS B
16-351B 1.00 1.04 1.00 6.00 1.26 1.25 (0.18) (25) () SF§-352B GVF§300-150BR
12-352B 0.75 0.79 0.75 5.00 1.18 1.00 0.20
16-352B 1.00 1.04 1.00 6.00 1.26 1.25 (0.20) GVF§400~490-020B
GVF§400-200BR
12-501B 0.75 0.79 0.75 5.00 1.18 1.00 0.20 SF§-501B GVF§250~350-020B CBN & PCD C
16-501B GVF§300-150BR D
12-502B 1.00 1.04 0.315 1.00 6.00 1.26 1.25 (0.18) 50 70 CPS-6V LW-3 SF§-502B HH4X12 E
16-502B 0.20 (25) () GVF§400~490-020B
12-701B 0.75 0.79 0.75 5.00 1.18 1.00 SF§-701B GVF§400-200BR
16-701B
12-702B 1.00 1.04 1.00 6.00 1.26 1.25 (0.20) SF§-702B GVF§250~350-020B TOOLHOLDERS SMALL TOOLS
16-702B SF§-501C GVF§300-150BR
GFVS§ 16-501C 0.75 0.79 0.75 5.00 1.18 1.00 0.20 SF§-502C
16-502C GVF§400~490-020B
1.00 1.04 1.00 6.00 1.26 1.25 (0.18) 70 100 GVF§400-200BR
0.75 0.79 0.75 5.00 1.18 1.00 0.20 (25) ()
GVF§350~450-040C
1.00 1.04 1.00 6.00 1.26 1.25 (0.20) GVF§500~600-040C
0.32 (0.26) 50 70
0.32 (0.32) (25) ()
16-701C 0.32 (0.26) 70 100 SF§-701C GVF§350~450-040C BORING
16-702C () SF§-702C GVF§500~600-040C
16-1001C 1.00 1.04 0.374 1.00 6.00 1.38 1.25 0.32 (0.32) (25) CPS-8V LW-4 SF§-1001C HH4X12 GVF§350~450-040C F
16-1002C 150 SF§-1002C GVF§500~600-040C
0.32 (0.26) 100 ()
0.32 (0.32) (25)
16-1501C 0.32 (0.26) 150 250 SF§-1501C GVF§350~450-040C GROOVING G
16-1502C 0.32 (0.32) (25) () SF§-1502C GVF§500~600-040C
GFVT§ 12-351B 0.75 0.79 0.75 5.00 0.87 1.18 0.20 35 50 SF§-351B GVF§250~350-020B CUT-OFF H
16-351B 1.00 1.04 1.00 6.00 0.98 1.38 (0.18) (25) () SF§-352B GVF§300-150BR
12-352B 0.75 0.79 0.75 5.00 0.87 1.18 0.20
16-352B 1.00 1.04 1.00 6.00 0.98 1.38 (0.20) GVF§400~490-020B
GVF§400-200BR
12-501B 0.75 0.79 0.75 5.00 0.87 1.18 0.20 SF§-501B GVF§250~350-020B THREADING
16-501B (0.18) SF§-502B GVF§300-150BR
12-502B 1.00 1.04 0.315 1.00 6.00 0.98 1.38 0.20 50 70 CPS-6V LW-3 HH4X12 J
16-502B (0.20) (25) () GVF§400~490-020B
0.75 0.79 0.75 5.00 0.87 1.18 GVF§400-200BR
1.00 1.04 1.00 6.00 0.98 1.38
12-701B 0.75 0.79 0.75 5.00 0.87 1.18 0.20 70 100 SF§-701B GVF§250~350-020B HSK TOOLING SPARE PARTS N
16-701B 1.00 1.04 1.00 6.00 0.98 1.38 (0.18) (25) () SF§-702B GVF§300-150BR
12-702B 0.75 0.79 0.75 5.00 0.87 1.18 0.20
16-702B 1.00 1.04 1.00 6.00 0.98 1.38 (0.20) GVF§400~490-020B
GVF§400-200BR
GFVT§ 16-501C 0.32(0.26) 50 70 SF§-501C GVF§350~450-040C P
16-502C 0.32(0.32) (25) () SF§-502C GVF§500~600-040C
16-701C 0.32(0.26) 70 100 SF§-701C GVF§350~450-040C
16-702C () SF§-702C GVF§500~600-040C
16-1001C 1.00 1.04 0.374 1.00 6.00 1.06 1.50 0.32(0.32) (25) CPS-8V LW-4 SF§-1001C HH4X12 GVF§350~450-040C TECHNICAL R
16-1002C 150 SF§-1002C GVF§500~600-040C
0.32(0.26) 100 ()
0.32(0.32) (25)
16-1501C 0.32(0.26) 150 250 SF§-1501C GVF§350~450-040C INDEX T
16-1502C 0.32(0.32) (25) () SF§-1502C GVF§500~600-040C
Note 1. Dimension T shows the distance from the Toolholder to the cutting edge. The grooving depth is the mentioned in ( ).
2. The value ( ) of Face Grooving diameter. (D MAX.) is the maximum outer diameter value after the initial groove between MIN.~MAX. (It is possible to widen the groove to infinity ).
The value ( ) of Face Grooving diameter. (D MIN.) is the minimum diameter of the boss which remains in the center when widening the groove width to a smaller value after the initial groove
between MIN.~MAX.
3. Standard toolholders are designed with the edge position 0.039" above the center.
When using non-standard Toolholders, set the Edge position 0.039" above the center.
4. GFVS and GFVT are composed of a base body and a blade.
If the blade should be damaged, replace it with a new blade as listed in the left table.
(e.g.) GFVSR12-HB+SFR-351B = GFVSR12-351B
(e.g.) GFVTR12-HB+SFR-351B = GFVTR12-351B
: U.S. Stock Standard kyocera@kyocera-tools.ru G113
: World Express (Shipping: 7-10 Business Days) www.kyocera-tools.ru