ITEMNSE!W для заказа - kyocera@kyocera-tools.ru KGDI
INTERNAL DIA. GROOVING TOOLHOLDER
KGDI NEW
Internal Grooving
Stable Machining with Excellent Chip Control and Smooth Chip Evacuation
1 Excellent Chip Control with GMI Chipbreaker for Internal Grooving
Evenly breaks chips in various cutting conditions with newly designed chipbreaker geometry.
Good chip control even in finishing applications with small depths of cut.
Rear ramp Center geometry squeezes chips and Chip Control Comparison (Internal Evaluation)
supports chip deformation. prevents chip clogging during high
feed machining.
GMI Chipbreaker Competitor A Conventional F
Smooth chip control with stable chip shape compared with
Competitor A and Conventional F.
Prevents frequent machine stops caused by tangled chips.
Corner design stabilizes Front design stabilizes chip shape Cutting Conditions: Vc = 330 sfm, f = 0.003 ipr Toolholder: KGDIR3225B-3
chip shape during finishing and improves during low feed machining. Insert: GDM3015N-040GMI Workpiece: 5120 Steel
chip breaking performance.
2 Smooth Chip Evacuation by Creating Chip Pocket
Smooth chip evacuation when grooving and finishing.
G GROOVING Cutting Conditions: 0.213”
Vc = 100 m/min
EXTERNAL : D.O.C. = 0.118", : D.O.C. = 0.039", : D.O.C. = 0.008"
INTERNAL f = 0.003 ipr
Toolholder: KGDIR3225B-3
FACE Insert: GDM3015N-040GMI 0.236”
Workpiece: 4131 Steel 1.299”
Residual Chips (Internal Evaluation)
60 Prevents
50 Chip
Residual Rate (%) 40 Clogging 0.984”
Improved Chip Evacuation with 30 DOWN
Innovative Chip Pockets
20
10
0
KGDI Competitor B Competitor C
Chips remaining in machined bore were greatly reduced compared with Competitor B and C.
3 Low Cutting Forces and Stable Machining
GMI chipbreaker prevents chip clogging and reduces cutting forces.
Cutting Force Comparison (Internal Evaluation) GMI Chipbreaker
1,200 Resultant Force Principal Force Back Force Cutting Force (N) 1,500 0.5 1 1.5 2 Stable machining with
1,000 Cutting Time (S) few changes in cutting
1,000 15% force.
500
Cutting Force (N) 800 DOWN 0 2.5
0
Instantaneous increase
600 of cutting force due to
clogged chips.
400 1,500 Competitor D
2.5
200 Cutting Force (N) 1,000
500
0 Competitor D 0
0
GMI Chipbreaer
Cutting Conditions: Vc = 490 sfm, f = 0.004 ipr Toolholder: KGDIR3225B-3 0.5 1 1.5 2
Insert: GDM3015N-040GMI Workpiece: 4131 Steel Cutting Time (S)
G64 kyocera@kyocera-tools.ru
www.kyocera-tools.ru