для заказа - kyocera@kyocera-tools.ru
MULTI-FUNCTION / GROOVING TOOLHOLDER
G MN Classification of Usage P Carbon Steel / Alloy Steel
: Light Interruption / 1st Choice M Stainless Steel
: Light Interruption / 2nd Choice K Cast Iron Ref. Page for Toolholder GRADES A
: Continuous / 1st Choice N Non-ferrous Metals B
: Continuous / 2nd Choice S Titanium Alloy C
Hard materials (40HRC) D
H Hard materials (40HRC) E
CBN
Dimensions (in) PCD
Insert Part Number W r M L H S KBN510 KBN525 KPD001 KPD010 INSERTS
inch mm
GMN 2 0.079 2.0 0.008 0.071
3 0.016 0.091
2° 2° 4 0.118 3.0 0.008 0.130
W±0.002” 5 0.016 0.165
M S 6 0.158 4.0 0.008 0.205
L 0.016
0.197 5.0 0.008 CBN & PCD
0.016
r 0.236 6.0 0.008 0.787 0.169 0.114 G36
0.016 G37
Deep Grooving H
1-Edge
S=0.114” TOOLHOLDERS SMALL TOOLS
KGM / KGM-T Available Cutting Diameter Dimensions are in inches. Recommended Cutting Conditions G129
There is a limit to available grooving depth depending 0.787” (Dimension t, 1.575)
on the workpiece diameter 0.709” (Dimension t, 5.118”)
5.118” BORING
(D: Cutti1n.g58Di5”a.)
0.984”
If the workpiece diameter is large, F
the possible cutting diameter G
becomes smaller due to H
interference with the toolholder. J
N
KGM Available Cutting Diameter Table e.g.) KGMR2525M-3T20+GMN3 GROOVING P
R
Toolholders D Cutting Diameter T
KGM§ 0810K-1.5-125
- - - ---- --- - - 10mm 14mm 16mm 32mm
1010-1.5… - - - ---- 40mm 60mm
1212-1.5… - - - - 25mm 26mm 28mm 20mm 25mm 32mm 60mm 100mm
0810K-2-125 - - - ---- 10mm 14mm 16mm 32mm
6-2-5 32mm 36mm 40mm - -
1010-2… - - - 1.60" 2.40"
8-2-6 --- 40mm 60mm CUT-OFF
1212-2… - - - 0.16" 0.12" 0.08"
1616-2… 32mm 40mm 50mm 0.80" 1.00" 1.28" 4mm 3mm 2mm
1010-2.5…
1212-2.5… - - - - -- - 20mm 25mm 32mm
1616-2.5… - - - 1.00" 1.04" 1.12"
1616-3… 32mm 40mm 50mm - 25mm 26mm 28mm 2.00"
Available Grooving Depth T (in) 32mm 40mm 50mm 60mm 80mm 100mm
Available Grooving Depth T (mm) 0.64" 0.60" 0.56" 50mm 0.04" THREADING
16mm 15mm 14mm - -- - 1mm
- 25mm 26mm 28mm 40mm 60mm
60mm 80mm 100mm 60mm 100mm
60mm 80mm 100mm 20mm 25mm 32mm
0.52" 0.50" 0.48"
13mm 12.5mm 12mm 0.44" 32mm 36mm 40mm
11mm
0.40" 0.36" 0.32" 0.28" 0.24" 0.20" HSK TOOLING SPARE PARTS
10mm 9mm 8mm 7mm 6mm 5mm
KGM-T Available Cutting Diameter Table (GMN, GM§ When Using 1-edge Insert)
Toolholders D Cutting Diameter
KGM§ 2012K-2T17
-- - -- - - - 66mm 80mm 130mm 260mm
12-2T -- - --
2020K-2T17 -- - -- - - - 2.64" 3.20" 5.20" 10.40"
16-2T -- - --
2525M-2T1710 -- - -- - - - 66mm 80mm 130mm 260mm
1616H-3T20 -- - --
2012K-3T20 -- - -- - - - 2.64" 3.20" 5.20" 10.40"
12-3T -- - --
2020K-3T20 -- - -- - - - 66mm 80mm 130mm 260mm
16-3T -- - --
2525M-3T20 -- - -- 40mm 54mm 70mm 100mm 180mm TECHNICAL
12-4T -- - --
2020K-4T20 -- - -- 40mm 90mm 130mm 240mm
2525M-4T20 -- - --
16-4T -- 2.00" 5.60" 9.60" 1.60" 3.60" 5.20" 9.60"
2525M-4T25 -- 50mm 140mm 240mm
16-5T -- 2.00" 5.60" 9.60" 40mm 90mm 130mm 240mm
2525M-5T25 -- 50mm 140mm 240mm
3232P-5T25 -- 50mm 280mm 600mm 1.60" 3.60" 5.20" 9.60"
2525M-6T30 100mm 300mm
Available Grooving Depth T (in) 1.20" 1.08" 1.00" 0.92" 0.88" 40mm 90mm 130mm 240mm
Available Grooving Depth T (mm) 30mm 27mm 25mm 23mm 22mm
1.60" 3.60" 5.20" 9.60" INDEX
40mm 90mm 130mm 240mm
40mm 90mm 130mm 240mm
0.80" 0.76" 0.72" 0.68" 0.64" 0.60" 0.56" <0.52"
20mm 19mm 18mm 17mm 16mm 15mm 14mm <13mm
: U.S. Stock Standard kyocera@kyocera-tools.ru CBN & PCD Inserts are sold in 1 piece boxes.
: World Express (Shipping: 7-10 Business Days) www.kyocera-tools.ru
G35