для заказа - kyocera@kyocera-tools.ru Pin Lock / Lever Lock
BORING BAR [DN..43 NEGATIVE INSERT]
S pare Parts (Common)
Spare Parts
Lever Lock Screw Shim Shim Pin Punch Wrench Lock Pin Shim Shim Screw Wrench
(for Shim Screw)
Toolholder Part Number
S25R - PDN§15-32 - - - - - LW-3 PP-4 PD-42 SB-2050TR FT-6
S32S - PDN§15-44 LL-3N LS-2N LD-42 LSP-2 PC-2 LW-3 - - - -
S40T - PDN§15-54 *LD-42-20
· Shim When using inserts whose corner-R(r) = 1.60mm or larger for S25R-PDN§15-32, use shim modified by additional processing to prevent interference between workpiece and shim.
When using inserts whose corner-R(r) = 1.60mm or larger for S32S-PDN§15-44 and S40T-PDN§15-54, purchase and use shim with * mark separately to prevent interference
between workpiece and shim.
H ow to Change S25R-PDN§15-32 Inserts H ow to Assemble Spare Parts
· Please replace S25R-PDN§15-32 insert from · S25R-PDN§15-32 (Pin Lock) · S32S-PDN§15-44 (Lever Lock)
the back side · S40T-PDN§15-54 (Lever Lock)
Insert Punch
Shim Screw (To install Shim Pin)
Shim Insert
Lock Pin Shim Pin Lock
Shim Screw
F Lever
BORING
SOLID The arrow shows clamping Wrench
POSITIVE direction (Please clamp from back side)
INSERTS Recommended torque for insert clamp
AD BARS 3.5N·m (for LW-3)
NEGATIVE
INSERTS Back side of toolholder
A pplicable Inserts
Application Finishing Finishing- Finishing- Finishing- Medium- Medium- Medium- Medium-Roughing / Roughing
Medium Medium Medium Roughing Roughing Roughing High Feed Rate
B22 B22 B23
Ref. Page B22 PQ CQ CJ B23 B23 B24 B24 B24
PP GS PG PS
PT Standard
Insert
Toolholder
...-PDN§15-... DNMG43.. DNMG43.. DNMG43.. DNMG43.. DNMG43.. DNMG43.. DNMG43.. DNMG43.. DNMG43..
Application Roughing Single Sided / Roughing / Medium Low Carbon Steel / Low Carbon Steel / Low Carbon Steel / Stainless Steel / Stainless Steel / Stainless Steel /
High Feed Rate B27 Finishing Medium Roughing Finishing Medium-Roughing Medium-Roughing
Ref. Page B24 B25 B25 B25 B25 B26 B26 B26
PX XP XQ XS MQ MS MU
PH §
Insert
Toolholder
...-PDN§15-... DNMG43.. DNMM43.. DNGG43.. DNMG43.. DNMG43.. DNMG43.. DNMG43.. DNMG43.. DNMG43..
Application Stainless Steel / Cast Iron Cast Iron Cast Iron Cast Iron Non-ferrous Non-ferrous Non-ferrous Hardened
Ref. Page Medium-Roughing B26 Metals Metals Metals Materials
Insert B27 B27 B91 B27 B27 C23 C8, C9
B26 C ZS GC Ceramic CBN
TK AH §-A3 PCD
Toolholder
...-PDN§15-... DNMG43.. DNMG43.. DNMG43.. DNMG43.. DNGA43.. DN_G43.. DNGG43.. DNMM43.. DNGA43..
Recommended Cutting Conditions F103~F104
F82 kyocera@kyocera-tools.ru
www.kyocera-tools.ru