для заказа - kyocera@kyocera-tools.ru
DYNAMIC BAR S uperior Chip Evacuation (External Coolant)
N ew Dynamic Bar
Dynamic Bar Competitor A Competitor B
Toolholder design through
stress analysis:
Maximum structural thickness
for high rigidity.
Controls chattering to achieve
stable machining.
Large chip pocket:
Exhibits superior chip evacuation.
BORING In Competitor A and B's products chips remain inside the workpiece, but chips from
Inside theDynamic Bar are all evacuated from the workpiece.
Workpiece
Dynamic design driven by the latest computer simulation technology. Chip Evacuation Direction
F P ocket Length Comparison C hip Evacuation Direction
Pocket length SCLC(P) STLB(P)
Pocket length (mm)
Part Number Dynamic Bar Competitor A
A16-SCLPR09-18 type 37 29 Better Evacuation with Dual Chip Flow
A20-SCLCR09-22 type
48 32
Dynamic Bar with Superior Chip Evacuation
High rigidity and chattering resistance by using a special alloy the help of stress analysis technology.
Previously unattained surface finish and dimensional accuracy are now achieved.
A nti-chatter Vibration Performance S urface Finish Comparison
Vibration of the Dynamic Bar was minimal even at high cutting speeds, enabling stable machining.
Good Dynamic Bar Competitor A Competitor B
4415 4415
5.5 5.0 Vc = 490 sfm Surface Wall Vc = 690 sfm
5 4.5 D.O.C. = 0.020" D.O.C. = 0.020"
f = 0.004 ipr f = 0.004 ipr
4 S16-SCLPR09 A16Q-SCLPR09-18
3 CPMH321L-Y CPMH321XP(PV7020)
2 L/D = 4
1 External Coolant
Dynamic Bar Competitor A Competitor B Surface Ra=0.4µm Ra=0.6µm Ra=3.4µm Direction of Vibration
AE type Roughness Rz=2.3µm Rz=3.6µm Rz=14.0µm Measurement
Maximum Toolholder Overhang (L/D) Oscillatory
Waveform
kyocera@kyocera-tools.ru
F2 www.kyocera-tools.ru