Kyocera - Каталог фрезерование 2017 ENG
для заказа - kyocera@kyocera-tools.ru
MOFX45
Applicable Inserts Chipbreaker Range
Applicable Inserts B21 <1049> <1049>
Part Number GRADES A
B
0.1575 0.1575 GT Chipbreaker C
0.1181 0.1181 D
GT Chipbreaker LINEUP / INSERTS 45 / 70 LEAD E
F
D.O.C. G
D.O.C. H
OFMR 0.0787 OFMR 0.0787 J
MOFX45...-SF 070405EN-SH0.0394 SH0C7hip0br4ea0ker8EN-GT 0.0394 SH Chipbreaker K
O
Recommended Cutting Conditions C15 P
Note 1) OFMR0704EN-GT / SH is a neutral insert. It can be a0lso used0f.o0r0L3e9ft-h0a.n0d07(L9) cu0t.t0e1r 18 0.0157 0 0.0039 0.0079 0.0118 0.0157 R
fz (ipt)
(special order item). fz (ipt)
Max D.O.C. and Usable Edges
Note 2) Inserts for MOFX type cutter cannot be used for MOF type cutters (Ref. to page C15).
Usable Edges Max. D.O.C. 75 LEAD
OFMR07 type
How to Adjust Edge Height 4 Edges 90 LEAD
(using 2 edges at the same time) 0.40"
1.Set the edge height adjustment screw 0.16"
8 Edges
• Set the distance between the (using only 1 edge at a time)
bottom of edge height
adjustment screw 4. Loosen the screws (Preparation for edge fluctuation adjustment) HIGH FEED
and the cutter body
to approximately • Loosen the wedge screw by
0.040". approximately 10.
2. Set the cartridge • Loosen the cartridge screw by
approximately 45.
• Set the cartridge to the cutter
body with the cartridge screw. 5. Correct the edge height MULTI-FUNCTION SLOT MILLS RADIUS / BALL-NOSE OTHER APPLICATIONS TOOL HOLDING SPARE PARTS
Recommended torque: 5N·m
• Measure the front edge height.
3. Set the wedge Using the most protruding
insert as the reference, turn the
• After setting the insert to the edge height adjustment screw
cartridge, setthe wedge with counterclockwise to raise the
the wedge screw. front edge height to match.
Recommended torque: 6N·m
6. Make the final adjustment
• Tighten the cartridge screw.
Recommended torque: 5N·m
Tighten the wedge screw.
Recommended torque: 6N·m
• Measure the front edge height
again.
Outlines of MOFX / MOF Mill
MOFX MOF (Ref. page C14)
High durability of cutter body due to the cartridge design. Excellent chips evacuation when roughing sticky materials such as low
Best for finishing due to easy edge height adjustment.
carbon steel and stainless steel.
Finishing Roughing
Stable Machining Unstable Machining
High Good Quality High Low Carbon Steel / Low Carbon Steel / TECHNICAL
Efficiency Stainless Steel Efficiency Cutting Force Alloy Steel / Cast Iron Sticky Material / Stainless Steel
MOFX MOFX MOF MOF MOFX MOF INDEX T
+ + + + + +
GT SH GT SH GT SH
MOFX is great for high precision machining and unstable machining.
kyocera@kyocera-tools.ru C17
www.kyocera-tools.ru