Kyocera - Каталог фрезерование 2017 ENG
для заказа - kyocera@kyocera-tools.ru
MFK
Recommended Cutting Conditions (Coated Carbide)
Workpiece Material Insert Grades Cutting Speed Chipbreaker fz (ipt)
Vc (sfm) GM
GH 0.0024 0.0039 0.0079 0.0118 0.0157 GRADES A
GL B
CA420M 560 ~ 750 ~ 980 GM 0.0098 C
PR1510 390 ~ 590 ~ 820 GH D
Cast Iron PR1525 490 ~ 660 ~ 820 GL 0.0118 LINEUP / INSERTS 45 / 70 LEAD E
Nodular Cast Iron CA420M 330 ~ 490 ~ 660 F
PR1510 Edge Prep. 0.0047 G
PR1525 0.0079 H
0.004 20° J
0.0098 K
Edge Prep. O
0.0039 P
0.002 15°
Recommended Cutting Conditions (Ceramic) : 1st Recommendation : 2nd Recommendation
• Without Chipbreaker
Workpiece Material Insert Grades Cutting Speed 0.0020 0.0039 fz (ipt) 0.0118 0.0157 75 LEAD
Vc (sfm) 0.0079
Cast Iron KS6050 1970 ~ 2950 ~ 3940 0.0039 90 LEAD
Nodular Cast Iron CS7050 1310 ~ 1970 ~ 2950
KS6050
CS7050
• With Chipbreaker Insert Grades Cutting Speed 0.0020 0.0039 fz (ipt) 0.0118 0.0157 HIGH FEED
Workpiece Material Vc (sfm) 0.0079
Cast Iron KS6050 1970 ~ 2950 ~ 3940 0.0039 MULTI-FUNCTION SLOT MILLS RADIUS / BALL-NOSE OTHER APPLICATIONS TOOL HOLDING SPARE PARTS
Nodular Cast Iron CS7050 1310 ~ 1970 ~ 2950
KS650
CS7050
: 1st Recommendation : 2nd Recommendation
Recommended Application Range
Gray Cast Iron Nodular Cast Iron Gray Cast Iron / Nodular Cast Iron
(Insert Grades : Coated Carbide) (Insert Grades : Coated Carbide) (Insert Grades : Ceramic)
0.2362 GL0.2362 GH 0.2362
GM
0.1575 GH 0.1575 0.1575
GL GM
D.O.C. 0.0787 KS6050/CS7050
D.O.C.
D.O.C.0.0020 0.0039 0.0059 0.0079
fz (ipt)
0.0787 W 0.0787 W
0.0039 0.0079 0.0118 0.0157 0.0039 0.0079 0.0118 0.0157
fz (ipt) fz (ipt)
* Note, when using wiper insert
1. When using W type, please use together with GM or GH.
2. If machining over fz = 0.0079", insert corner will be damaged.
The main cutting edge of W type insert is receding from that of GM and GH.
Therefore, the feed rate for the insert next to W type is double of the other inserts.
TECHNICAL R
INDEX T
kyocera@kyocera-tools.ru C13
www.kyocera-tools.ru