Kyocera - Каталог фрезерование 2017 ENG
для заказа - kyocera@kyocera-tools.ru
MSTB SLOT MILL (UP-RIGHT)
Combination of Applicable Inserts
Clamp Screw Edge Width A Line B Line C Line Wrench Tightening GRADES
(Standard
Part Number for Clamp Torque A
attachment Applicable Clamp Applicable Clamp Applicable Clamp B
mm inch Inserts Screw Inserts Screw Inserts Screw Screw (N·m) C
parts) D
E
0.250 - LNEU1240.. SE-40055TR LINEUP / INSERTS 45 / 70 LEAD F
LNEU1240.. SE-40055TR - - G
H
MSTB AN250-T SE-40055TR - 0.270 LNEU1245.. SE-40068TR J
0.289 LNEU1245.. SE-40068TR -
Inch Size 0.312 - LNEU1245.. SE-40068TR
LNEU1245.. SE-40068TR - -
MSTB AN312-T SE-40068TR - 0.332 LNEU1250.. SE-40080TR
0.351 LNEU1250.. SE-40080TR -
0.375 LNEU1245.. SE-40068TR LNEU1245.. SE-40068TR LNEU1245.. SE-40068TR
MSTB AN375-T SE-40068TR - 0.395 LNEU1250.. SE-40080TR
0.414 LNEU1250.. SE-40080TR LNEU1250.. SE-40080TR
MSTB AN500-T SE-40090TR - 0.500 LNEU1255... SE-40090TR LNEU1255... SE-40090TR LNEU1255... SE-40090TR 75 LEAD
0.520 SE-40100TR LNEU1260... SE-40100TR
0.539 LNEU1260... SE-40100TR LNEU1260... LNEU1235.. SE-40050TRN TT-15L 3
- LNEU1240.. SE-40055TR
MSTB AN0607-T SE-40050TRN 6.0 - LNEU1235.. SE-40050TRN - 90 LEAD
SN0607-T 6.5 LNEU1240.. SE-40055TR
7.0
MSTB AN0809-T 8.0 LNEU1245.. SE-40068TR
LNEU1245.. SE-40068TR -
SE-40068TR 8.5 - -
Metric Size LNEU1250.. SE-40080TR
SN0809-T 9.0 LNEU1250.. SE-40080TR HIGH FEED
MSTB AN1011-T SE-40068TR 10.0 - LNEU1245.. SE-40068TR LNEU1245.. SE-40068TR LNEU1245.. SE-40068TR
SN1011-T 10.5 LNEU1250.. SE-40080TR LNEU1250.. SE-40080TR LNEU1250.. SE-40080TR
11.0
MULTI-FUNCTION SLOT MILLS RADIUS / BALL-NOSE OTHER APPLICATIONS TOOL HOLDING SPARE PARTS
12.0 LNEU1255... SE-40090TR LNEU1255... SE-40090TR LNEU1255... SE-40090TR
MSTB AN1213-T SE-40090TR 12.5 - LNEU1260... SE-40100TR
13.0 LNEU1260... SE-40100TR LNEU1260... SE-40100TR
* For clamp screw, above listed “Standard attachment parts” are included. In case of necessity of another size of clamp screw by changing slotting width, please purchase separately.
Slot Width (Edge Width) Adjustment
12 3 4 #-JOF
"-JOF "-JOF $-JOF
"-JOF $-JOF "-JOF $-JOF $-JOF
The Slot width (edge width) of MSTB Slot Mills is adjustable by a maximum of 1.00mm (0.039") with the combination of inserts. K
O
1. In the case of MSTBAN0607-T the width (W) is 6.00mm (0.236") by installing LNEU1235 on both A line and C line. P
2. By replacing C line only with LNEU1240 the width (W) is 6.50mm (0.256"). R
3. By replacing A line and C line with LNEU1240 the width (W) is 7.00mm (0.276").
4. If the slotting width (edge width) is 10.00mm (0.394") or more, the B line (middle edge) is necessary.
* Caution
1) There is no description such as “A line”, “B line”, and “C line” on the actual Slot Mill. These are only for explanation of the combination of inserts.
2) Use proper clamp screws for applicable inserts on the basis of the above chart.
3) The Slot width (edge width) of MSTB Slot Mills is adjustable by a maximum of 1.00mm (0.039") with the combination of inserts.
Bottom Cutting Shape of MSTB Slot Mill m TECHNICAL
Slot bottom shape will be (Fig.1) convex shape.
INDEX T
Fig.1 Convex bottom shape H11
kyocera@kyocera-tools.ru
www.kyocera-tools.ru