Kyocera - Каталог фрезерование 2017 ENG
для заказа - kyocera@kyocera-tools.ru
MFH-RAPTOR MINI
MFH Mini Cutting Performance (GM Chipbreaker)
Fine Pitch End Mill Standard Pitch End Mill Standard Pitch End Mill MFH Mini Face Mill
0.039 0.012 (Cutter Dia. 0.625" - 0.750") (Cutter Dia. 1.000" - 1.250") (Cutter Dia. 1.500" - 2.000")
0.039 0.024 0.039 0.032 0.039 0.032
D.O.C. (in) 0.020 0.032 D.O.C. (in) 0.020 0.047 D.O.C. (in) 0.020 D.O.C. (in) 0.020
0.020 0.039 0.059 0.020 0.039 0.059 0.020 0.039 0.059 0.020 0.039 0.059
Feed Rate fz (ipt) Feed Rate fz (ipt) Feed Rate fz (ipt) Feed Rate fz (ipt)
Recommended Cutting Conditions
Chipbreaker Workpiece Holder Description and Feed Rate (fz: ipt) *Recommended D.O.C. = 0.020" Reference Value Recommended Insert Grade (Vc: sfm)
Material
MFH0625...2T MFH0750...3T N/A MFH1000...4T MFH1000...5T MFH1250...5T MFH1250...6T MFH1500...5T/6T MEGACOAT NANO CVD
(MFH16...2T) (MFH20...3T) (MFH20...4T) (MFH25...4T) (MFH25...5T) (MFH32...5T) (MFH32...6T) MFH2000...8T
PR1535 PR1525 PR1510 CA6535
Carbon Steel 0.008~0.028~0.047 0.008~0.020~0.031 0.008~0.031~0.059 0.008~0.020~0.031 0.008~0.031~0.059 0.008~0.020~0.031 0.008~0.031~0.059 - -
390~590~820 390~590~820
Alloy Steel 0.008~0.028~0.047 0.008~0.020~0.031 0.008~0.031~0.059 0.008~0.020~0.031 0.008~0.031~0.059 0.008~0.020~0.031 0.008~0.031~0.059 - -
330~520~720 330~520~720
Mold Steel 0.008~0.020~0.035 0.008~0.016~0.024 0.008~0.024~0.047 0.008~0.016~0.024 0.008~0.024~0.047 0.008~0.016~0.024 0.008~0.024~0.047 - -
( ~40 HRc) 260~460~590 260~460~590
HIGH FEEDF Mold Steel 0.008~0.012~0.020 0.008~0.010~0.012 0.008~0.012~0.024 0.008~0.010~0.012 0.009~0.012~0.024 0.008~0.010~0.012 0.008~0.012~0.024 - -
( 40~50 HRc) 200~330~430 200~330~430
Austenitic 0.008~0.020~0.035 0.008~0.016~0.024 0.008~0.024~0.047 0.008~0.016~0.024 0.008~0.024~0.047 0.008~0.016~0.024 0.008~0.024~0.047 - -
Stainless Steel 330~520~660 330~520~660
GM Martensitic 0.008~0.020~0.035 0.008~0.016~0.024 0.008~0.024~0.047 0.008~0.016~0.024 0.008~0.024~0.047 0.008~0.016~0.024 0.008~0.024~0.047 - -
Stainless Steel 490~660~820 590~790~980
Precipitation 0.008~0.020~0.035 0.008~0.016~0.024 0.008~0.024~0.047 0.008~0.016~0.024 0.008~0.024~0.047 0.008~0.016~0.024 0.008~0.024~0.047 - - -
Hardened 300~390~490
Stainless Steel
Gray Cast Iron 0.008~0.028~0.047 0.008~0.020~0.031 0.008~0.031~0.059 0.008~0.020~0.031 0.008~0.031~0.059 0.008~0.020~0.031 0.008~0.031~0.059 - - -
390~590~820
Nodular Cast 0.008~0.020~0.035 0.008~0.016~0.024 0.008~0.024~0.047 0.008~0.016~0.024 0.008~0.024~0.047 0.008~0.016~0.024 0.008~0.024~0.047 - - -
Iron 330~490~660
Ni-base Heat 0.008~0.012~0.024 0.008~0.010~0.016 0.008~0.016~0.031 0.008~0.010~0.016 0.008~0.016~0.031 0.008~0.010~0.016 0.008~0.016~0.031 - -
Resistant Alloy 70~100~160 70~100~160
Titanium Alloy 0.008~0.012~0.024 0.008~0.010~0.016 0.008~0.016~0.031 0.008~0.010~0.016 0.008~0.016~0.031 0.008~0.010~0.016 0.008~0.016~0.031 - -
130~200~260 100~160~230
Standard Pitch End Mills Fine Pitch End Mills MFH Mini Face Mills : 1st Recommendation : 2nd Recommendatin
• Machining with coolant is recommended for Ni-base Heat Resistant Alloy and Titanium Alloy
• The number in bold font is recommended starting conditions. Adjust the cutting speed and the feed rate within the above conditions according to the actual machining situation.
• Machining with CAT30 or equivalent, feed rate should be reduced to 25% of recommended cutting conditions
• Internal coolant is recommended for slotting applications
Approximate Programming Radius Adjustment
Shape Holder Chipbreaker Cutting Edge Programmable Unmachined Part Max. Wall Angle
Angle (°) (R) (K)
Workpiece Side Wall
Max. Inclination Angle
(°)
Cutting Edge Angle MFH…-03-… GM 12° 0.063" 0.015" 90°
(°)
Programmable (R) Unmachined
Part (K)
F18 kyocera@kyocera-tools.ru
www.kyocera-tools.ru